Unit of competency Outline

Date retreived
22/07/2026 3:31 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct bitumen sprayer operations

Conduct bitumen sprayer operations

Unit of competency
National Code
RIICBS307D
State Code
WH060
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
3.00
Current Release Date
07/12/2014
View on TGA
State Implementation and Classification
Approved Date
29/05/2014
Field of Education
030717 - Plant And Machine Operations
Original Release Date
29/05/2014
Nominal Hours
84
Description
This unit describes a participant’s skills and knowledge required to conduct bitumen sprayer operations in Civil Construction. This unit is appropriate for those working in operational roles.Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of the unit
Notes
Elements and Performance Criteria
1. Plan and prepare for bitumen sprayer operations
  • 1.1 Access, interpret and apply bitumen sprayer operations documentation and ensure the work activity is compliant
  • 1.2 Obtain, read, interpret, clarify and confirm work requirements
  • 1.3 Identify and address potential risks, hazards and environmental issues, and implement control measures
  • 1.4 Select and wear personal protective equipment appropriate for work activities
  • 1.5 Confirm and apply environmental protection and safety requirements
  • 1.6 Obtain, interpret and implement traffic management signage requirements
  • 1.7 Select and check for faults plant, tools and equipment to carry out tasks
  • 1.8 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency
2. Set up sprayer
  • 2.1 Ensure ancillary tanks are full and adequate materials are determined to perform spray operations
  • 2.2 Check tank for prevention of contamination
  • 2.3 Calculate spraying speed and pump rpm
  • 2.4 Introduce correct amount of cutter
  • 2.5 Fit appropriate number and size of jets to the spray bar
3. Load sprayer
  • 3.1 Check previous load details for compatibility
  • 3.2 Load tank with the prescribed type and quantity of material
  • 3.3 Add additives and mix where required
  • 3.4 Check, heat and maintain temperature of the material
  • 3.5 Measure, calculate and record material quantities and additives
4. Operate bitumen sprayer
  • 4.1 Carry out start-up, park, shutdown and secure equipment procedures
  • 4.2 Select and modify bitumen spraying techniques to appropriately meet changing work conditions
  • 4.3 Plan work to maximise machine coverage and minimise hand spraying
  • 4.4 Set control valves correctly for the type of operation
  • 4.5 Drive and operate equipment
  • 4.6 Conduct, control and monitor spraying operations to ensure materials are sprayed to specification
  • 4.7 Carry out operations adjacent to traffic
  • 4.8 Complete spraying without damage to property or vehicles
5. Operate hand lance
  • 5.1 Inspect hand lance to ensure correct operation
  • 5.2 Select hand lancing techniques to match work conditions
  • 5.3 Conduct, control and monitor hand spraying operations
  • 5.4 Carry out hand spraying operations adjacent to traffic
6. Unload/empty sprayer
  • 6.1 Unload or empty tank into storage or waste
  • 6.2 Clean tank interior and spray bar
7. Carry out operator maintenance
  • 7.1 Prepare machine for maintenance
  • 7.2 Conduct inspection and fault finding
  • 7.3 Carry out scheduled maintenance tasks
  • 7.4 Process written maintenance records
8. Clean up
  • 8.1 Clear work area and dispose of or recycle materials
  • 8.2 Clean, check, maintain and store plant, tools and equipment
  • 8.3 Carry out housekeeping requirements
No information
No information
Replaces
State Code National Code Title Type
WB024 RIICBS307A Conduct bitumen sprayer operations Unit of competency
Replaced By
State Code National Code Title Type
OBM72 RIICBS307E Conduct bitumen sprayer operations Unit of competency
State Code National Code Title Type
J667 RII30913 Certificate III in Civil Construction Qualification
AZB0 RII30915 Certificate III in Civil Construction Qualification