Unit of competency Outline

Date retreived
23/07/2026 8:13 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Repair/overhaul bicycle wheels and hubs

Repair/overhaul bicycle wheels and hubs

Unit of competency
National Code
AURB318267A
State Code
D7577
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
21/06/2011
View on TGA
State Implementation and Classification
Approved Date
26/09/2011
Field of Education
030599 - Automotive Engineering And Technology, N.e.c.
Original Release Date
26/09/2011
Nominal Hours
20
Description
This unit of competency describes the skills and knowledge required to repair a range of bicycle wheels with different hub, spoke and rim configurations.It requires the ability to understand specifications and use tools and equipment to inspect, repair/overhaul and test bicycle wheels and hubs.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.This unit replaces AURB218266A Repair bicycle wheels.
Notes
Elements and Performance Criteria
1. Inspect bicycle wheel and hub
  • 1.1. Check customer requirements and intended use of the unit in accordance with workplace procedures
  • 1.2. Inspect bicycle wheel and hub for faults and worn or damaged components
  • 1.3. Determine repairs by visual, aural and tactile inspections and measurements
  • 1.4. Compare conditions found with bicycle wheel and hub specifications and customer use requirements
  • 1.5. Identify repair options for bicycle wheel and hub in accordance with workplace procedures
  • 1.6. Document and cost repairs and obtain customer approval for work to be undertaken
2. Prepare for repair/overhaul of bicycle wheel and hub
  • 2.1. Plan repair/overhaul sequence, including post-repair testing and checking process
  • 2.2. Determine availability of tooling and equipment
  • 2.3. Prepare parts list and determine availability of replacement components
  • 2.4. Identify additional persons to assist in repair process and confirm availability
  • 2.5. Select tooling and equipment to meet job requirements and check for good working order
3. Repair/overhaul and test bicycle wheel and hub
  • 3.1. Repair/overhaul bicycle wheel and hub according to plan
  • 3.2. Use personal safety equipment and precautions to protect others in the workplace
  • 3.3. Handle, maintain and use tooling and equipment in accordance with occupational health and safety (OHS) requirements
  • 3.4. Check customer requirements and bicycle wheel and hub specifications following repair/overhaul procedures
  • 3.5. Operate repaired bicycle wheel and hub through full range, noting test results, including non-conformity
  • 3.6. Check repaired bicycle wheel and hub, complete adjustments and alignments and prepare unit for delivery
4. Complete work and clean up
  • 4.1. Store portable tooling and equipment in approved designated areas
  • 4.2. Update workplace records, customer file and warranty information as required by enterprise
  • 4.3. Clean up work area and dispose of waste in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
W2820 AURB328266A Repair bicycle frames Unit of competency
W2809 AURB218266A Repair bicycle wheels Unit of competency
Replaced By
State Code National Code Title Type
WF058 AURBTJ3004 Repair and overhaul bicycle wheels and hubs Unit of competency
No information