Unit of competency Outline
Date retreived
23/07/2026 11:56 AM AWST
23/07/2026 11:56 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Remove and install movable body glass
Remove and install movable body glass
Unit of competency
National Code
AURV333863A
AURV333863A
State Code
W5239
W5239
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
16/01/2006
Field of Education
030507 - Automotive Vehicle Refinishing
Original Release Date
16/01/2006
Nominal Hours
30
Description
This unit covers the competence required to remove and install movable body glass in various applications.
Notes
Elements and Performance Criteria
1. Prepare for work
- 1.1. Work instructions are used to determine job requirements, including method, materials and equipment.
- 1.2. Job specifications are read and interpreted.
- 1.3. OH&S requirements, including dust and fume collection, breathing apparatus, eye and ear personal protection needs are observed throughout the work.
- 1.4. Material for repair is selected.
- 1.5. Equipment and tooling are identified and checked for safe and effective operation.
- 1.6. Location of airbags and supplementary restraint systems that may be affected by work are identified.
- 1.7. Procedures are determined to minimise waste material.
- 1.8. Procedures are identified for maximising energy efficiency while completing the job.
2. Remove movable body glass
- 2.1. Removal is completed without causing damage to any component or system.
- 2.2. Information is accessed and interpreted from manufacturer/ component supplier specifications.
- 2.3. Removal of movable body glass is carried out in accordance with vehicle manufacturer/component supplier specifications and tolerances.
- 2.4. Workplace documentation is completed and dealt with relevant to removal outcomes.
- 2.5. Removal activities are carried out according to industry regulations/guidelines, OH&S legislation, and enterprise procedures/policies.
3. Install movable body glass
- 3.1. Installation is completed without causing damage to any component or system.
- 3.2. Information is accessed and interpreted from manufacturer/ component supplier specifications.
- 3.3. Installation of movable body glass is carried out in accordance with vehicle manufacturer/component supplier specifications and tolerances.
- 3.4. Workplace documentation is completed and dealt with relevant to installation outcomes.
- 3.5. Installation activities are carried out according to industry regulations/guidelines, OH&S legislation, and enterprise procedures/policies.
4. Clean up work area and maintain equipment
- 4.1. Material that can be reused is collected and stored.
- 4.2. Waste and scrap is removed following workplace and environmental procedures.
- 4.3. Equipment and work area are cleaned and inspected for serviceable condition in accordance with workplace procedures.
- 4.4. Unserviceable equipment is tagged and faults identified in accordance with workplace requirements.
- 4.5. Operator maintenance is completed in accordance with manufacturer/component supplier specifications and worksite procedures.
- 4.6. Tooling is maintained in accordance with workplace procedures.
Methods are to include bolted, rubber and adhesive installation methods
Specific requirements are to include electrical system(s), glass components, mouldings/trims, electrical and mechanical components and systems drainage
Vehicles may include:
passenger
commercial (small and large)
plant and agricultural equipment
recreational
mining
forestry
marine craft
caravans and motor homes
outdoor equipment
recreational boating
OH&S practices must abide by:
State/industry OH&S legislation
Work is carried out in accordance with award provisions
Hand tooling, power tooling, cleaning equipment, sealing equipment, lifting equipment, scaffolds, cutting equipment, adhesives, sealants and solvents
Industry standards and specification documents
Vehicle manufacturer/component supplier specifications
Product manufacturer/component supplier specifications
Company operating procedures
Industry codes of practice
Customer report
State/Territory/Federal statutory requirements, including Australian Design Rules
Specific requirements are to include electrical system(s), glass components, mouldings/trims, electrical and mechanical components and systems drainage
Vehicles may include:
passenger
commercial (small and large)
plant and agricultural equipment
recreational
mining
forestry
marine craft
caravans and motor homes
outdoor equipment
recreational boating
OH&S practices must abide by:
State/industry OH&S legislation
Work is carried out in accordance with award provisions
Hand tooling, power tooling, cleaning equipment, sealing equipment, lifting equipment, scaffolds, cutting equipment, adhesives, sealants and solvents
Industry standards and specification documents
Vehicle manufacturer/component supplier specifications
Product manufacturer/component supplier specifications
Company operating procedures
Industry codes of practice
Customer report
State/Territory/Federal statutory requirements, including Australian Design Rules
Critical aspects of evidence
It is essential that competence is fully observed and there is ability to transfer competence to changing circumstances and to respond to unusual situations in the critical aspects of:
interpreting and communicating operational information
selecting components/glass/sealants/adhesives/tooling and equipment
removing and replacing movable glass components
adjusting movable glass components
safe working practices, including precautions for working near airbags and supplementary restraint systems
vehicle protection methods
Underpinning knowledge
Removal and replacement methods
Measuring and testing procedures
Technical information
Equipment safety requirements
Personal safety requirements
Vehicle safety requirements
Manufacturer/component supplier/company policies
Specific key competencies, underpinning and employability skills required to achieve the performance criteria
These include a number of processes that are learned throughout work and life, which are required in most jobs. Some of these are covered by the national key competencies, although others may be added. The details below highlight how these competencies are to be applied in the attainment of this unit.
Application of the key competencies in this unit are to satisfy the nominated level in which:
Level 1 - relates to working effectively within set conditions and processes;
Level 2 - relates to management or facilitation of conditions or processes; and
Level 3 - relates to design, development and evaluation of conditions or process.
How will the candidate apply the following key competency in this unit? The candidate will need to:
Collect, analyse and organise information
Collect, organise and understand information related to work orders, plans and safety procedures for removal and installation of movable body glass
(Level 1)
Communicate ideas and information
Communicate ideas and information to enable confirmation of work requirements and specifications, coordination of work with worksite supervisor, other workers and customers, and the reporting of work outcomes and problems
(Level 1)
Plan and organise activities
Plan and organise activities, including preparation and layout of worksite and obtaining of equipment and materials to avoid backtracking, workflow interruptions or wastage
(Level 1)
Work with others and in a team
Work with others and in a team by recognising dependencies and using cooperative approaches to optimise workflow and productivity
(Level 2)
Use mathematical ideas and techniques
Use mathematical ideas and techniques to complete measurements and estimate material requirements for the work
(Level 1)
Solve problems
Use pre-checking and inspection techniques to anticipate planning and scheduling problems, avoid wastage of time and material
(Level 2)
Use technology
Use workplace technology related to:
Access, interpret and apply technical information
Use tooling and equipment
Removal and installation of movable body glass
(Level 2)
Context of assessment
Underpinning knowledge and skills may be assessed on or off the job
Assessment of practical skills must take place only after a period of supervised practice and repetitive experience. If workplace conditions are not available, assessment in simulated workplace conditions is acceptable
Prescribed outcome must be able to be achieved without direct supervision
Method of Assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace contexts.
Assessment should be by direct observation of tasks, questioning of underpinning knowledge and achievement of removal and installation outcome.
Assessment should be conducted over time and may be in conjunction with assessment of other units of competence
Specific resource requirements for this unit
Access to vehicle and manufacturer/component supplier specifications as identified in the Range Statement and standard operating procedures
It is essential that competence is fully observed and there is ability to transfer competence to changing circumstances and to respond to unusual situations in the critical aspects of:
interpreting and communicating operational information
selecting components/glass/sealants/adhesives/tooling and equipment
removing and replacing movable glass components
adjusting movable glass components
safe working practices, including precautions for working near airbags and supplementary restraint systems
vehicle protection methods
Underpinning knowledge
Removal and replacement methods
Measuring and testing procedures
Technical information
Equipment safety requirements
Personal safety requirements
Vehicle safety requirements
Manufacturer/component supplier/company policies
Specific key competencies, underpinning and employability skills required to achieve the performance criteria
These include a number of processes that are learned throughout work and life, which are required in most jobs. Some of these are covered by the national key competencies, although others may be added. The details below highlight how these competencies are to be applied in the attainment of this unit.
Application of the key competencies in this unit are to satisfy the nominated level in which:
Level 1 - relates to working effectively within set conditions and processes;
Level 2 - relates to management or facilitation of conditions or processes; and
Level 3 - relates to design, development and evaluation of conditions or process.
How will the candidate apply the following key competency in this unit? The candidate will need to:
Collect, analyse and organise information
Collect, organise and understand information related to work orders, plans and safety procedures for removal and installation of movable body glass
(Level 1)
Communicate ideas and information
Communicate ideas and information to enable confirmation of work requirements and specifications, coordination of work with worksite supervisor, other workers and customers, and the reporting of work outcomes and problems
(Level 1)
Plan and organise activities
Plan and organise activities, including preparation and layout of worksite and obtaining of equipment and materials to avoid backtracking, workflow interruptions or wastage
(Level 1)
Work with others and in a team
Work with others and in a team by recognising dependencies and using cooperative approaches to optimise workflow and productivity
(Level 2)
Use mathematical ideas and techniques
Use mathematical ideas and techniques to complete measurements and estimate material requirements for the work
(Level 1)
Solve problems
Use pre-checking and inspection techniques to anticipate planning and scheduling problems, avoid wastage of time and material
(Level 2)
Use technology
Use workplace technology related to:
Access, interpret and apply technical information
Use tooling and equipment
Removal and installation of movable body glass
(Level 2)
Context of assessment
Underpinning knowledge and skills may be assessed on or off the job
Assessment of practical skills must take place only after a period of supervised practice and repetitive experience. If workplace conditions are not available, assessment in simulated workplace conditions is acceptable
Prescribed outcome must be able to be achieved without direct supervision
Method of Assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace contexts.
Assessment should be by direct observation of tasks, questioning of underpinning knowledge and achievement of removal and installation outcome.
Assessment should be conducted over time and may be in conjunction with assessment of other units of competence
Specific resource requirements for this unit
Access to vehicle and manufacturer/component supplier specifications as identified in the Range Statement and standard operating procedures
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WF479 | AURVTG3010 | Remove and install movable body glass | Unit of competency |
