Unit of competency Outline

Date retreived
22/07/2026 11:34 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install lining, panelling and moulding

Install lining, panelling and moulding

Unit of competency
National Code
CPCCCA3024
State Code
OCO05
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
24/12/2024
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
040311 - Carpentry And Joinery
Original Release Date
01/06/2021
Nominal Hours
35
Description
This unit of competency specifies the skills and knowledge required to prepare, set out and install lining and panelling to masonry and timber and/or metal framed walls, meeting all relevant requirements of the National Construction Code (NCC), Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation.The unit includes installation of mouldings to provide decorative finishes.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan and prepare.
  • 1.1 Read and interpret work instructions and plan sequence of work.
  • 1.2 Plan all work to comply with laws and regulations, the National Construction Code (NCC), Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications, workplace requirements, drawings and specifications.
  • 1.3 Select tools and equipment, check for serviceability and report any faults.
  • 1.4 Select and use personal protective equipment (PPE) as required for each stage of the task.
  • 1.5 Inspect work site, locate services, assess hazards and apply risk controls, including required signage and barricades.
  • 1.6 Select materials required for task, calculate quantities, handle safely and prepare and position ready for use.
2 Prepare surface for lining/panelling.
  • 2.1 Select fixing procedures for lining materials.
  • 2.2 Set out surface to provide a balanced panel or board effect to width and height.
3 Install lining/panelling.
  • 3.1 Mark lining materials and cut to length and/or shape, fit and position.
  • 3.2 Secure and fix panelling/lining.
  • 3.3 Install panelling/lining to plumb, level and uniform plane.
4 Cut and fix profiled architrave mouldings.
  • 4.1 Mark standard architraves for edging and cut to length, position and fit.
  • 4.2 Mark skirtings and cut to length, position and fit.
  • 4.3 Mark mitre joints, cut to length, position and fit flush to face and true without gaps.
  • 4.4 Mark scribed joints and cut to length, position and fit.
  • 4.5 Cut scotia return end to profile shape and length.
  • 4.6 Mark standard pelmet moulding to length and cut, fit, assemble and fix with mitres true without gaps.
  • 4.7 Set out raked moulding to position and shape mould to pattern for each position.
5 Clean up.
  • 5.1 Clean up meeting all legislative and workplace requirements for safety, waste disposal and materials handling.
  • 5.2 Check, maintain and store tools and equipment and report any faults.
No information
No information
No information
State Code National Code Title Type
BGB8 CPC30220 Certificate III in Carpentry Qualification
BGD6 CPC31920 Certificate III in Joinery Qualification