Unit of competency Outline

Date retreived
22/07/2026 6:52 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Set gems in claw and bezel style settings

Set gems in claw and bezel style settings

Unit of competency
National Code
MEM19047
State Code
OEU76
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
19/12/2022
View on TGA
State Implementation and Classification
Approved Date
19/04/2023
Field of Education
100307 - Jewellery Making
Original Release Date
19/04/2023
Nominal Hours
36
Description
This unit of competency defines the skills and knowledge required to prepare, seat and set gems into claw and bezel style settings. It applies to pre-manufactured jewellery items.This unit applies to individuals involved in jewellery manufacture in a small or large-scale production context. They use and adapt technical skills and knowledge to produce work that meets pre-determined design and production requirements.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit Weight: 4
Notes
Elements and Performance Criteria
1. Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications
2. Prepare for gem setting
  • 2.1 Plan gem setting procedure and associated materials and equipment based on job requirements
  • 2.2 Obtain and prepare equipment for the task
  • 2.3 Identify materials used in bezel and claw settings and their essential characteristics
  • 2.4 Handle gem material in a manner that ensures damage is prevented
3. Prepare shapes and bezels for setting
  • 3.1 Secure the item to be set, in a manner which prevents damage to the jewellery piece during the setting process
  • 3.2 Adjust the height of the bezel according to the depth of the gem
  • 3.3 Cut the bearing to size by hand or with a burr and seat and secure gem in accordance with industry standards
  • 3.4 Shape the top of the bezel wall and bright cut the inner edge as required by the shape
  • 3.5 Conduct work in accordance with environmental considerations
4. Prepare claw settings
  • 4.1 Prepare claw for setting and select the height and depth of the bearing to be cut
  • 4.2 Cut the bearing by hand or with a burr and seat the gem in accordance with industry standards
  • 4.3 Form the claw to secure the gem in the setting, including finishing the top of the claw to a predetermined shape without damaging the gem
5. Finish work
  • 5.1 Remove any securing compound and clean the jewellery piece for inspection
  • 5.2 Check jewellery piece against quality and client requirements and rectify any deficiencies
  • 5.3 Complete documentation in accordance with workplace procedures
  • 5.4 Clean up and maintain production environment and equipment in accordance with SOPs
No information
No information
Replaces
State Code National Code Title Type
S8088 MEM19047A Set gems in claw and bezel style settings Unit of competency
State Code National Code Title Type
BIW8 MEM40322 Certificate IV in Advanced Jewellery Manufacture Qualification