Unit of competency Outline

Date retreived
22/07/2026 6:00 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Produce complex flat-bed die cut or embossed product

Produce complex flat-bed die cut or embossed product

Unit of competency
National Code
ICPCBF4260
State Code
OBP67
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
06/05/2020
View on TGA
State Implementation and Classification
Approved Date
20/08/2020
Field of Education
030103 - Printing
Original Release Date
20/08/2020
Nominal Hours
20
Description
This unit describes the performance outcomes, skills and knowledge required to produce complex flat-bed die cutting or embossing.It applies to individuals who work under direct supervision with limited responsibility in preparing materials and equipment and resolving issues to produce a finished product.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Maintain machine delivery system
  • 1.1 Monitor and adjust delivery systems
  • 1.2 Add substrate to and remove substrate from the process according to job specifications
2. Maintain complex flat-bed cutting process
  • 2.1 Check and adjust knife condition and cutting pressures
  • 2.2 Review and adjust registration of knives
  • 2.3 Check and adjust packing of cutting devices
  • 2.4 Monitor and adjust in-line processes
3. Maintain operation of production process
  • 3.1 Use machine controls as required
  • 3.2 Monitor and verify performance using the process control system
  • 3.3 Conduct quality checks on a regular basis and adjust as required
  • 3.4 Report process adjustments to eliminate problems according to enterprise procedures
4. Identify and rectify problems
  • 4.1 Identify and report problems in cutting machine operation according to enterprise procedures
  • 4.2 Carry out adjustments or corrections according to specified procedures, and within scope of own role
  • 4.3 Verify repairs and adjustments as required prior to resumption of operations
5. Conduct shutdown of production process
  • 5.1 Follow shutdown sequence according to manufacturer specifications and enterprise procedures
  • 5.2 Remove solid and liquid waste from operating area and recycle and dispose of, as required, according to regulatory requirements and enterprise procedures
  • 5.3 Clean and disengage all required parts of machinery used in printing process according to manufacturer specifications and enterprise procedures
  • 5.4 Sharpen cutting devices according to work health and safety (WHS) procedures
  • 5.5 Complete required production records and enterprise documentation
No information
No information
Replaces
State Code National Code Title Type
AUN59 ICPCBF426 Produce complex flat-bed die cut or embossed product Unit of competency
State Code National Code Title Type
BFB9 ICP31320 Certificate III in Print Binding, Finishing and Packaging Qualification