Unit of competency Outline

Date retreived
23/07/2026 6:00 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Test and commission dense wavelength division multiplexing transmission systems

Test and commission dense wavelength division multiplexing transmission systems

Unit of competency
National Code
ICTOPN510
State Code
OCV83
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
19/01/2021
View on TGA
State Implementation and Classification
Approved Date
29/03/2021
Field of Education
031307 - Communications Technologies
Original Release Date
29/03/2021
Nominal Hours
50
Description
This unit describes the skills and knowledge required to test and commission optical transmission systems using dense wavelength division multiplexing (DWDM) technology.It applies to individuals who work with networking carriers, service providers, public utilities and broadcasting companies. They combine technical optical communications skills with broader organisational and administrative skills in a range of commercial contexts and environments.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to commission DWDM transmission system
  • 1.1 Implement hazard risk control measures according to organisational standards and requirements
  • 1.2 Review system specifications and technical data and identify system operating parameters
  • 1.3 Obtain and check required equipment for faults and compliance with organisational regulations
  • 1.4 Verify that all required equipment is installed, and that circuit cards and filler cards are correctly located and seated
  • 1.5 Check that interconnecting fibres to optical multiplexers and shelves are intact and routed
  • 1.6 Establish communication between computer and DWDM shelf
  • 1.7 Upload latest software release to each DWDM shelf in the network
2. Commission DWDM transmission system
  • 2.1 Connect an optical test set and a physical optical loopback to the system, and select protocol compatible with DWDM hardware
  • 2.2 Check connection status and that test set data is passing
  • 2.3 Monitor quality of received signal, set performance monitoring (PM) features and retrieve PM counts
  • 2.4 Conduct a long-term stability test and verify that no errors are noted while customer input signal is set to the worst case (minimum) power level
  • 2.5 Verify that no alarms are generated during long term stability test periods
  • 2.6 Dispose of antistatic packaging to minimise environmental impact
3. Complete test and commissioning documentation
  • 3.1 Finalise documentation on commissioning test results according to organisational procedures
  • 3.2 Present results to required person according to organisational procedures
No information
No information
Replaces
State Code National Code Title Type
AWE21 ICTOPN504 Test and commission a dense wavelength division multiplexing transmission system Unit of competency
State Code National Code Title Type
BGJ4 ICT50220 Diploma of Information Technology Qualification