Unit of competency Outline

Date retreived
23/07/2026 11:10 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Set up machine for cutting (trimming)

Set up machine for cutting (trimming)

Unit of competency
National Code
ICPCBF223
State Code
AUO47
TGA Status
Deleted
DTWD Status
Transition (Deleted)
Current Release Number
1.00
Current Release Date
26/03/2015
View on TGA
State Implementation and Classification
Approved Date
16/09/2015
Field of Education
030717 - Plant And Machine Operations
Original Release Date
16/09/2015
Nominal Hours
30
Description
This unit describes the skills and knowledge required to set up 3- or 5-knife trimmers or spine trimmers, and may involve gathering (collating) and fastening. It applies to individuals who work under direct supervision with some accountability for the quality of outcomes.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for job
  • 1.1 Job specifications are read and interpreted from job documentation or production control system
  • 1.2 Set-up is carried out correctly in minimum time with minimum wastage
  • 1.3 Availability of all job related components is checked
2. Install and replace cutting knives into machine
  • 2.1 Appropriate knives are selected and secured to the machine
  • 2.2 Dull blades are securely bolted into protective holder
3. Set up section transportation system
  • 3.1 Feeder is set up and adjusted according to job specifications
  • 3.2 Section pick-up and transportation system is set up and adjusted according to job specifications
  • 3.3 Transfer systems are set up and adjusted according to job specifications
4. Set up stacking system
  • 4.1 Delivery is set up and adjusted according to job specifications
  • 4.2 Section transfer and control system is set up and adjusted according to job specifications
5. Set up machine for trimming
  • 5.1 Trimmer knives are set up and adjusted according to job specifications
  • 5.2 Clamping pressures are set up and adjusted according to job specifications
  • 5.3 Stops and lays are set to remove desired trim
6. Conduct sample run
  • 6.1 Material to be used for sample is organised correctly
  • 6.2 Machine is set up and operated to produce a specified sample according to work health and safety requirements, manufacturer’s specifications and enterprise procedures
  • 6.3 Sample is visually inspected and/or tested or laboratory testing is organised according to enterprise procedures
  • 6.4 Results are interpreted to determine adjustment requirements
  • 6.5 Adjustment changes are carried out according to product and machine specifications
No information
No information
Replaces
State Code National Code Title Type
D3019 ICPCF223C Set up machine for cutting (trimming) Unit of competency
State Code National Code Title Type
AWB3 ICP20115 Certificate II in Printing and Graphic Arts (General) Qualification