Unit of competency Outline

Date retreived
22/07/2026 11:32 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Measure and draw site layout for manufactured furniture products

Measure and draw site layout for manufactured furniture products

Unit of competency
National Code
MSFFM3011
State Code
WI432
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
20/06/2014
Field of Education
100599 - Graphic And Design Studies, N.e.c.
Original Release Date
20/06/2014
Nominal Hours
16
Description
This unit of competency covers measuring and recording site layout details to provide an accurate basis for both manufacture and installation of furniture products.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Obtain measurements
  • 1.1 The purpose of obtaining measurements is clarified and confirmed
  • 1.2 The most appropriate method of obtaining the measurement is selected and applied
  • 1.3 Accurate measurements are obtained, confirmed and recorded
  • 1.4 Calculations required for the measurement or validation are selected and correctly applied
  • 1.5 Quality assurance requirements, standards and tolerances associated with enterprise operations are recognised and adhered to
2 Draw site layout
  • 2.1 Intended use of the site is clarified and confirmed
  • 2.2 A site plan is prepared showing all features and measurements
  • 2.3 A site elevation is completed showing all features and measurements
  • 2.4 Unique and non-complying features which may impact on manufacture and/or installation are highlighted and referred to the appropriate party
No information
No information
Replaces
State Code National Code Title Type
W8620 LMFFM3013B Measure and draw site layout for manufactured furniture products Unit of competency
Replaced By
State Code National Code Title Type
OEJ97 MSFFM3041 Determine and document requirements for cabinetry installation Unit of competency