Unit of competency Outline

Date retreived
22/07/2026 9:44 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Plant trees and shrubs

Plant trees and shrubs

Unit of competency
National Code
AHCPGD207
State Code
ODV19
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
15/02/2022
View on TGA
State Implementation and Classification
Approved Date
31/05/2022
Field of Education
050301 - Horticulture
Original Release Date
31/05/2022
Nominal Hours
20
Description
This unit of competency describes the skills and knowledge required to manually plant trees and shrubs and other containerised and bare-rooted plants, including preparing, inspecting and planting trees and shrubs and completing planting work.The unit applies to individuals who plant trees and shrubs under general supervision with limited autonomy or accountability.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for planting operations
  • 1.1 Confirm tree and shrub planting activities with supervisor
  • 1.2 Identify workplace health and safety hazards, assess risks and report to supervisor
  • 1.3 Prepare and use tools and equipment according to supervisor instructions
  • 1.4 Select, fit and use personal protective equipment (PPE) applicable to the task
  • 1.5 Mark out site as directed
  • 1.6 Control competing plants as required
2. Prepare trees and shrubs for planting
  • 2.1 Water trees and shrubs prior to planting where appropriate
  • 2.2 Confirm root ball is damp
  • 2.3 Remove trees and shrubs from containers
3. Inspect plants and report problems
  • 3.1 Inspect plant and root ball condition
  • 3.2 Report dry, water repellent and loose root balls
  • 3.3 Report the presence of symptoms of pests or disease
  • 3.4 Apply root treatments as directed
4. Install trees, shrubs and/or other plants
  • 4.1 Excavate planting holes
  • 4.2 Apply soil treatments and amendments according to supervisor instructions
  • 4.3 Place plants in prepared hole
  • 4.4 Back-fill planting hole and consolidate soil
  • 4.5 Water plants to eliminate air pockets and prevent dehydration
  • 4.6 Install plant protection, stakes and ties as directed
  • 4.7 Apply mulch as directed
5. Complete work
  • 5.1 Dispose of or recycle soil and waste material from site
  • 5.2 Clean, maintain and store materials, tools and equipment
  • 5.3 Report work outcomes and malfunctions, faults, wear or damage of tools to supervisor
No information
No information
Replaces
State Code National Code Title Type
BAP80 AHCPGD201 Plant trees and shrubs Unit of competency