Unit of competency Outline

Date retreived
22/07/2026 6:07 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Test, align and troubleshoot aircraft synchro and servo system components

Test, align and troubleshoot aircraft synchro and servo system components

Unit of competency
National Code
MEAAVI0037
State Code
OEG52
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
22/11/2022
View on TGA
State Implementation and Classification
Approved Date
28/03/2023
Field of Education
031503 - Aircraft Maintenance Engineering
Original Release Date
28/03/2023
Nominal Hours
16
Description
This unit describes the skills and knowledge required to apply hand skills, test equipment and knowledge of analogue theory to test, align and troubleshoot synchro and servo components from fixed and rotary wing aircraft that are repaired or overhauled in aviation maintenance workshops during scheduled or unscheduled maintenance. Work may be performed individually or as part of a team.The unit is used in workplaces that operate under the airworthiness regulatory systems of the Civil Aviation Safety Authority (CASA) and the Defence Aviation Safety Authority (DASA).Any other relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Test synchro and servo system components
  • 1.1 Prepare and connect synchro and servo system components to the appropriate test equipment or rig in accordance with standard enterprise procedures
  • 1.2 Perform functional testing on components, or cycle components through prescribed test procedures, for evidence of serviceability or malfunction in accordance with maintenance manual while observing all relevant work health and safety (WHS) requirements
  • 1.3 Identify and record faults or unserviceabilities in required maintenance documentation
2. Align synchro and servo system components
  • 2.1 Adjust synchro and servo system components until operating within prescribed limits or tolerances in accordance with maintenance manuals and standard enterprise procedures to meet specifications
3. Troubleshoot synchro and servo system components
  • 3.1 Use available information from maintenance records and inspection and test results to assist in fault determination
  • 3.2 Troubleshoot faults and unserviceabilities using maintenance manual fault diagnosis guides and logic processes
  • 3.3 Locate synchro and servo system component faults and identify and record causes of faults in required maintenance documentation
  • 3.4 Determine requirements for rectification of faults
No information
No information
Replaces
State Code National Code Title Type
AUF14 MEA252 Test, align and troubleshoot aircraft synchro and servo system components Unit of competency