Unit of competency Outline

Date retreived
22/07/2026 9:15 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Cut and process vehicle and machinery flat laminated glass

Cut and process vehicle and machinery flat laminated glass

Unit of competency
National Code
AURVTG008
State Code
AXA01
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
040323 - Glazing
Original Release Date
13/07/2016
Nominal Hours
30
Description
This unit describes the performance outcomes required to measure, mark, cut and process flat laminated glass for installation into vehicles and machinery. It involves preparing for the task, selecting and using specialist tools and equipment, producing templates according to size, cutting flat laminated glass and finishing glass edges to given specifications, and completing workplace processes and documentation.It applies to those working in the automotive glazing service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to cut and process flat laminated glass
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Information is accessed and interpreted from laminated glass supplier specifications
  • 1.3 Laminated glass is sourced according to work order and job specifications and checked for quality
  • 1.4 Hazards associated with the work are identified and risks are managed
  • 1.5 Glass cutting equipment and personal protective equipment (PPE) are selected and checked for serviceability
  • 1.6 Work is planned to minimise off-cuts and use time efficiently
2. Fabricate templates and patterns
  • 2.1 Accurate measurements are taken or checked to prepare templates and patterns
  • 2.2 Suitable materials and equipment are used to fabricate templates and patterns
  • 2.3 Template and pattern are marked out and fabricated according to workplace instructions, workplace procedures, and safety and environmental requirements
3. Process glass
  • 3.1 Glass is measured, marked and cut out according to measurements, template and pattern, and safety and environmental requirements
  • 3.2 Glass cutting is completed according to workplace procedures, and safety and environmental requirements, and without causing damage to glass being cut
  • 3.3 Glass edges are arris or bevel edged according to workplace procedures, and safety and environmental requirements, and without causing damage to glass
4. Complete work processes
  • 4.1 Final inspection is made to ensure work meets workplace expectations
  • 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 4.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF477 AURVTG3008 Cut and process flat laminated glass Unit of competency