Unit of competency Outline

Date retreived
22/07/2026 7:28 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Set up and check electronic component assembly machines

Set up and check electronic component assembly machines

Unit of competency
National Code
UEEAS0005
State Code
OCA41
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
05/10/2020
View on TGA
State Implementation and Classification
Approved Date
12/07/2021
Field of Education
031317 - Electronic Equipment Servicing
Original Release Date
12/07/2021
Nominal Hours
36
Description
This unit involves the skills and knowledge required to set up and check electronic component assembly machines.It includes working safely, interpreting job specifications, identifying components by characteristics, following machine set-up work instructions and following quality procedures.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare to set-up machine
  • 1.1 Work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures for a given work area are identified, obtained and applied
  • 1.2 WHS/OHS risk control measures for work preparation are followed
  • 1.3 Work instructions are obtained and applied
  • 1.4 Advice is sought from the work supervisor to ensure that work is coordinated effectively with others
  • 1.5 Materials required for the work are obtained in accordance with workplace procedures
  • 1.6 Tools, equipment and testing devices needed to carry out the work are obtained and checked for correct operation and safety
2 Setup machine
  • 2.1 WHS/OHS risk control work measures are followed
  • 2.2 Machines are checked and isolated in accordance with WHS/OHS and workplace procedures
  • 2.3 Electronic components are selected sorted and placed in accordance with work instructions and workplace procedures
  • 2.4 Machine is set up in accordance with work instructions ensuring specified components are loaded correctly
  • 2.5 Solutions are used to resolve issues with supply of component
  • 2.6 Quality and inspection checks are conducted to ensure components comply with workplace procedures/relevant industry standards
  • 2.7 Work is completed in acceptable timeframe given environment and workplace conditions
3 Complete work report
  • 3.1 WHS/OHS risk control measures for work completion are followed
  • 3.2 Operational checks of machine are carried out in accordance with workplace procedures to ensure quality outcome are met
  • 3.3 Work report forms/data sheets on components are completed in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WC376 UEENEEA103A Set up and check electronic component assembly machines Unit of competency