Unit of competency Outline
Information current as of
19/10/2026 5:33 AM AWST
19/10/2026 5:33 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Produce accommodative orthoses
Produce accommodative orthoses
Unit of competency
National Code
LMTMF5003A
LMTMF5003A
State Code
W7399
W7399
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
15/10/2014
Original Release Date
16/07/2011
Nominal Hours
50
Field of Education
061799 - Rehabilitation Therapies, N.e.c.
Description
This unit covers the skills and knowledge necessary for the production and fitting of accommodative orthoses.
General notes
N/A
Elements and Performance Criteria
1 Select accommodative orthoses materials
- 1.1 Materials are selected that reflect client condition requirements and requirements for durability and performance
- 1.2 Other health professionals are consulted if necessary, to clarify or provide additional information
2 Make initial 3D design on cast
- 2.1 Design is consistent with material characteristics
- 2.2 Design is consistent with client anatomical features and condition needs
3 Produce technical drawing of accommodative orthoses
- 3.1 Drawing correctly specifies materials to be used in accommodative orthoses construction
- 3.2 Drawing correctly specifies anatomical matching, key references and specific performance requirements of accommodative orthoses
- 3.3 Dimensions and tolerances are correctly specified, including appropriate use of drawing symbols
4 Review the cast
- 4.1 Cast is reviewed for accuracy, material selection, three-dimensional design and consistency with technical drawing and prescription if present
- 4.2 Changes and refinements are made as necessary, including balancing aesthetic needs with footwear and condition requirements
5 Produce and post basic form
- 5.1 Basic form is produced to fitting accuracy of ± 1mm
- 5.2 Basic form reflects features that need to be checked for modification or refinement
- 5.3 Basic form is corrected and posted to accommodative orthoses standard
6 Produce trial fitting accommodative orthoses and conduct trial fitting
- 6.1 Trial fitting accommodative orthoses are produced
- 6.2 Diagnostic fitting is made and results interpreted for possible changes to accommodative orthoses design or materials
- 6.3 Existing shoes if provided, are modified for trial accommodative orthoses
7 Produce accommodative orthoses
- 7.1 Accommodative orthoses are produced, taking into account original assessment of client needs and results of trial fitting
- 7.2 Allowance is made for any variation between trial orthoses and final accommodative orthoses for example temporary posting
- 7.3 Dimensions and shape of accommodative orthoses are checked against specifications in technical drawing
- 7.4 Existing shoes if provided, are checked against accommodative orthoses and modified if necessary
- 7.5 Accommodative orthoses are finished off to established quality standards
8 Deliver and fit accommodative orthoses
- 8.1 A check is made of fitting and adjustments made if necessary
- 8.2 Client is informed of function, management and maintenance procedures for accommodative orthoses
- 8.3 Arrangements for follow-up are explained to client
- 8.4 Other health professionals are informed of supply of accommodative orthoses where appropriate
- 8.5 Supply of accommodative orthoses is noted in client records
9 Follow up client
- 9.1 Client is followed up according to schedule set at time of accommodative orthoses supply and appointments made if necessary
- 9.2 Function and state of accommodative orthoses is checked
- 9.3 Client condition is assessed and further medical grade footwear treatment or other health professional treatment arranged if necessary
RANGE STATEMENT
The Range Statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.
Legislative/regulatory requirements
All work must comply with relevant Federal and State or Territory legislative or regulatory requirements.
Accommodative orthoses may include
removable or incorporated insert
Materials may include:
used may include rubber
ethyl vinyl acetate (EVA) and polyurethane foams
cork
leather
Tools may include:
hand and machine tools
vacuum moulding equipment
computer-aided and mechanical duplicators
OHS practices
OHS practices must include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and may include:
manual handling techniques
standard operating procedures
personal protective equipment
safe materials handling
taking of rest breaks
ergonomic arrangement of workplaces
following marked walkways
safe storage of equipment
housekeeping
reporting accidents and incidents
other OHS practices relevant to the job and enterprise
The Range Statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.
Legislative/regulatory requirements
All work must comply with relevant Federal and State or Territory legislative or regulatory requirements.
Accommodative orthoses may include
removable or incorporated insert
Materials may include:
used may include rubber
ethyl vinyl acetate (EVA) and polyurethane foams
cork
leather
Tools may include:
hand and machine tools
vacuum moulding equipment
computer-aided and mechanical duplicators
OHS practices
OHS practices must include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and may include:
manual handling techniques
standard operating procedures
personal protective equipment
safe materials handling
taking of rest breaks
ergonomic arrangement of workplaces
following marked walkways
safe storage of equipment
housekeeping
reporting accidents and incidents
other OHS practices relevant to the job and enterprise
The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for the Training Package.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Demonstrates skills and knowledge to:
obtain and clarify instructions and requirements
identify special construction details and constraints
take accurate measurements
consider factors such as biomechanical requirements, volume expansion, functional and positioning requirements
translate information into working patterns
select appropriate materials
check cast
produce and fit accommodative orthoses
identify and confirm timelines and costs
communicate effectively with design team, customers etc.
apply OHS policies in work operations
maintain accurate records
apply administrative functions related to the construction of custom-made medical grade footwear
Consistently applies skills and knowledge when:
organising work
completing tasks
identifying improvements
using workplace practices
using OHS practices
recording and reporting accidents and incidents
assessing operational readiness of equipment used and work processes
recognising and adapting to cultural differences in the workplace, including modes of behaviour and interactions
completing work systematically with attention to detail without damage to goods and equipment
Context and specific resources for assessment
Assessment may occur on the job or in an appropriately simulated environment and requires access to work areas, materials and equipment and to information on workplace practices and OHS practices.
Guidance information for assessment
This unit may be assessed independently or in combination with other relevant units.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Demonstrates skills and knowledge to:
obtain and clarify instructions and requirements
identify special construction details and constraints
take accurate measurements
consider factors such as biomechanical requirements, volume expansion, functional and positioning requirements
translate information into working patterns
select appropriate materials
check cast
produce and fit accommodative orthoses
identify and confirm timelines and costs
communicate effectively with design team, customers etc.
apply OHS policies in work operations
maintain accurate records
apply administrative functions related to the construction of custom-made medical grade footwear
Consistently applies skills and knowledge when:
organising work
completing tasks
identifying improvements
using workplace practices
using OHS practices
recording and reporting accidents and incidents
assessing operational readiness of equipment used and work processes
recognising and adapting to cultural differences in the workplace, including modes of behaviour and interactions
completing work systematically with attention to detail without damage to goods and equipment
Context and specific resources for assessment
Assessment may occur on the job or in an appropriately simulated environment and requires access to work areas, materials and equipment and to information on workplace practices and OHS practices.
Guidance information for assessment
This unit may be assessed independently or in combination with other relevant units.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| AYP87 | LMTPDMF12A | Produce accommodative orthoses | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OBA12 | MSTMF4007 | Produce accommodative orthoses | Unit of competency |
