Unit of competency Outline
Date retreived
22/07/2026 1:40 PM AWST
22/07/2026 1:40 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Perform contour draping
Perform contour draping
Unit of competency
National Code
MSTAT5017
MSTAT5017
State Code
OEZ82
OEZ82
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
03/07/2023
Field of Education
100505 - Fashion Design
Original Release Date
03/07/2023
Nominal Hours
50
Description
This unit describes the skills and knowledge required to perform contour draping for styled garments that are worn against the body. Draping may be for a one-off garment that goes from drape to garment or a prototype that goes from drape to flat pattern for small volume production. Draping is performed on a body form, such as a mannequin or model.This unit applies to individuals who work in accordance with design specifications.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Prepare to perform contour draping
- 1.1 Select and prepare draping tools and equipment based on design specifications
- 1.2 Plot design lines from working drawings onto body form, using narrow tape
- 1.3 Check and confirm measurements against specifications
- 1.4 Prepare fabric for draping according to fabric characteristics and garment design
2. Plan drape
- 2.1 Identify requirements for adding ease and manipulating dart excess
- 2.2 Plan seam positioning and develop drape plan based on design requirements
- 2.3 Prepare cover designs if a fitted foundation to support volume draping or layering is required
3. Perform drape
- 3.1 Pin fabric on body form and perform draping operations to meet design requirements
- 3.2 Remove drape from model
- 3.3 Finalise drape and direct to next production process
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| BAW61 | MSTFD5012 | Perform contour draping | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| BIY3 | MST50122 | Diploma of Apparel, Fashion and Textiles | Qualification |