Unit of competency Outline
Date retreived
22/07/2026 10:54 AM AWST
22/07/2026 10:54 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Install, configure and test a local area network switch
Install, configure and test a local area network switch
Unit of competency
National Code
ICTTEN5200A
ICTTEN5200A
State Code
D3488
D3488
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
06/01/2011
Field of Education
031309 - Communications Equipment Installation And Maintenance
Original Release Date
06/01/2011
Nominal Hours
55
Description
This unit describes the performance outcomes, skills and knowledge required to undertake local area network (LAN) switch installation and configuration as part of the upgrade in an existing network or the implementation of a new network. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of endorsement but users should confirm requirements with the relevant federal, state or territory authority.
Notes
Elements and Performance Criteria
1. Prepare to install the network switch
- 1.1. Prepare for installation in line with site specific safety requirements and enterprise occupational health and safety (OHS) processes and procedures
- 1.2. Notify customer to arrange access to site
- 1.3. Document the topology of the LAN
- 1.4. Obtain current and future network capacity predictions according to current and future business requirements from the appropriate person
- 1.5. Specify the number and type of switch required, with reference to future network requirements
- 1.6. Specify the requirements for network management and security, as prescribed by organisational policy
- 1.7. Select the switch and switch operating system software version with the appropriate features according to required specifications
2. Install and configure the network switch
- 2.1. Assemble, rack mount and connect switch and peripherals according to manufacturer's requirements
- 2.2. Connect user to access points using cable that meets the appropriate standard
- 2.3. Establish a valid network connection with other network devices
- 2.4. Configure a network internet protocol (IP) address for the switch
- 2.5. Install or configure simple network management protocol (SNMP) agent software, on each switch, to collect network traffic data for the management information base (MIB) from that segment of the network and relay it to the management console
- 2.6. Install and configure SNMP management console software on a computer designated to be the network manager's main console, to collect network traffic data from the switch acting as agents
- 2.7. Manually configure the user access ports of the switch for speed and for full or half-duplex operation
3. Test the network switch and reconfigure the network
- 3.1. Test the switch and other network devices according to manufacturer's requirements and organisational guidelines
- 3.2. Test to ensure that there is connectivity across the network
- 3.3. Modify the network to verify SNMP management software
- 3.4. Make adjustments to the network, depending on test and troubleshooting results
4. Complete documentation and clean up worksite
- 4.1. Tabulate test results and complete all user reports
- 4.2. Complete report and notify client of status of the network
- 4.3. Clean up and restore worksite to client's satisfaction
- 4.4. Secure sign off from appropriate person
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Topology may include:
bus
hierarchical
hybrid
ring
star.
Network capacity may include:
expandability:
number of available uplink ports
hardware reliability
LAN topology support:
AppleTalk
Ethernet
FDDI
Token Ring
port bandwidth capabilities
100 megabits per second)
redundant power supply (AC/DC).
Appropriate person may include:
authorised business representative
client
IT support manager
network Administrator
network manager
small or medium enterprise (SME) customer
small office home office (SOHO) customer
supervisor.
Switch by vendors may include:
3Com
Accton
Bay
Cisco
DLink
Intel
NetGear
System 3000 Ethernet.
Peripherals may include:
Bluetooth devices
fax
Firewire (IEEE 1394)
input equipment may include:
mouse
pens
touch pad
laptops and desktop computers
mobile phones
modems
multimedia kits
palmtops and personal digital assistants (PDAs)
personal computer
printers
scanners
speakers
tape cartridges
universal serial bus (USB).
User may include:
department within the organisation
person within a department
third party.
Cable may include:
Category 5e, 6 or 7
crossover
fibre
shielded twisted pairs (STP)
straight through
unshielded twisted pairs (UTP).
Standard may include:
EIA/TIA 568A
EIA/TIA 568B.
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Topology may include:
bus
hierarchical
hybrid
ring
star.
Network capacity may include:
expandability:
number of available uplink ports
hardware reliability
LAN topology support:
AppleTalk
Ethernet
FDDI
Token Ring
port bandwidth capabilities
100 megabits per second)
redundant power supply (AC/DC).
Appropriate person may include:
authorised business representative
client
IT support manager
network Administrator
network manager
small or medium enterprise (SME) customer
small office home office (SOHO) customer
supervisor.
Switch by vendors may include:
3Com
Accton
Bay
Cisco
DLink
Intel
NetGear
System 3000 Ethernet.
Peripherals may include:
Bluetooth devices
fax
Firewire (IEEE 1394)
input equipment may include:
mouse
pens
touch pad
laptops and desktop computers
mobile phones
modems
multimedia kits
palmtops and personal digital assistants (PDAs)
personal computer
printers
scanners
speakers
tape cartridges
universal serial bus (USB).
User may include:
department within the organisation
person within a department
third party.
Cable may include:
Category 5e, 6 or 7
crossover
fibre
shielded twisted pairs (STP)
straight through
unshielded twisted pairs (UTP).
Standard may include:
EIA/TIA 568A
EIA/TIA 568B.
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Evidence of the ability to:
plan and prepare for the LAN switch installation task
select a LAN Switch to meet the client business specifications
install switches without the network losing connectivity or failing
install and test the switch that ensures interoperability within the network
use a range of switch configurations
apply solutions to a variety of switch-related problems
report on the status of the completed installation and seek sign off and customer satisfaction
use switches
apply solutions to defined switching problems.
Context of and specific resources for assessment
Assessment must ensure:
site where switch installation must be may be conducted
use of field measurement equipment currently used in industry
relevant switch specifications, technical requirements for a network, switch, cabling, networked (LAN) computers, workstations, servers and WAN service point of presence.
Method of assessment
A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit:
direct observation of the candidate installing, configuring and testing a LAN switch
oral or written questioning of required skills and knowledge
evaluation of report prepared by the candidate outlining testing procedures, results and recommendations to network changes.
Guidance information for assessment
Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended, for example:
ICTTEN4198A Install, configure and test an internet protocol network.
Aboriginal people and other people from a non-English speaking background may have second language issues.
Access must be provided to appropriate learning and assessment support when required.
Assessment processes and techniques must be culturally appropriate, and appropriate to the oral communication skill level, and language and literacy capacity of the candidate and the work being performed.
In all cases where practical assessment is used it will be combined with targeted questioning to assess required knowledge. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency.
Where applicable, physical resources should include equipment modified for people with special needs.
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Evidence of the ability to:
plan and prepare for the LAN switch installation task
select a LAN Switch to meet the client business specifications
install switches without the network losing connectivity or failing
install and test the switch that ensures interoperability within the network
use a range of switch configurations
apply solutions to a variety of switch-related problems
report on the status of the completed installation and seek sign off and customer satisfaction
use switches
apply solutions to defined switching problems.
Context of and specific resources for assessment
Assessment must ensure:
site where switch installation must be may be conducted
use of field measurement equipment currently used in industry
relevant switch specifications, technical requirements for a network, switch, cabling, networked (LAN) computers, workstations, servers and WAN service point of presence.
Method of assessment
A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit:
direct observation of the candidate installing, configuring and testing a LAN switch
oral or written questioning of required skills and knowledge
evaluation of report prepared by the candidate outlining testing procedures, results and recommendations to network changes.
Guidance information for assessment
Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended, for example:
ICTTEN4198A Install, configure and test an internet protocol network.
Aboriginal people and other people from a non-English speaking background may have second language issues.
Access must be provided to appropriate learning and assessment support when required.
Assessment processes and techniques must be culturally appropriate, and appropriate to the oral communication skill level, and language and literacy capacity of the candidate and the work being performed.
In all cases where practical assessment is used it will be combined with targeted questioning to assess required knowledge. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency.
Where applicable, physical resources should include equipment modified for people with special needs.
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| AWD07 | ICTTEN513 | Install, configure and test a local area network switch | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| AWG1 | ICT40415 | Certificate IV in Information Technology Networking | Qualification |
| D560 | ICA40411 | Certificate IV in Information Technology Networking | Qualification |