Unit of competency Outline

Date retreived
22/07/2026 10:21 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Maintain instruments and equipment

Maintain instruments and equipment

Unit of competency
National Code
MSL935004
State Code
AWO44
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
01/03/2016
View on TGA
State Implementation and Classification
Approved Date
16/08/2016
Field of Education
019909 - Laboratory Technology
Original Release Date
16/08/2016
Nominal Hours
120
Description
This unit of competency covers the ability to check the serviceability and calibration of laboratory/field instruments and equipment and perform routine maintenance, such as cleaning and replacement of consumables and minor components. Personnel are also required to perform basic troubleshooting and repairs consistent with warranty and service agreements.This unit of competency is applicable to technical assistants, instrument operators and technical officers working in all industry sectors.While no specific licensing or certification requirements apply to this unit at the time of publication, laboratory operations are governed by relevant legislation, regulations and/or external accreditation requirements. Local requirements should be checked.
Notes
Elements and Performance Criteria
1 Perform serviceability checks
  • 1.1 Perform pre-use and after-use checks in accordance with appropriate workplace and manufacturer procedures
  • 1.2 Identify faulty or unsafe components and equipment
  • 1.3 Troubleshoot basic faults or report the need for major maintenance and/or repairs
  • 1.4 Complete instrument/equipment logbooks to workplace requirements
2 Conduct routine maintenance safely
  • 2.1 Identify maintenance procedures, records and safety requirements
  • 2.2 Plan and adjust maintenance schedules in accordance with operational requirements
  • 2.3 Identify and replace or repair damaged, worn and/or spent components or items
  • 2.4 Clean instruments and equipment using recommended cleaning agents and techniques
  • 2.5 Store instruments and equipment in accordance with workplace and/or manufacturer requirements
  • 2.6 Update maintenance records in accordance with workplace procedures
  • 2.7 Arrange for reordering of consumable stocks and equipment components as necessary
3 Perform calibration/qualification checks
  • 3.1 Operate instruments and equipment in accordance with workplace and/or manufacturer procedures
  • 3.2 Check calibration/qualification using specified standards and/or procedures
  • 3.3 Record all calibration/qualification data accurately and legibly
  • 3.4 Document calibration status and report out-of-calibration equipment/instruments
  • 3.5 Quarantine out-of-calibration items
4 Arrange instrument servicing where appropriate
  • 4.1 Assess instrument repair status and determine if local repair or maintenance is possible and economical
  • 4.2 Arrange for repair or maintenance of equipment from accredited service agent or other appropriate personnel in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WA685 MSL935004A Maintain instruments and equipment Unit of competency
Replaced By
State Code National Code Title Type
OAC45 MSL934004 Maintain and calibrate instruments and equipment Unit of competency