Unit of competency Outline

Date retreived
22/07/2026 7:03 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Perform diving operations using SSBA

Perform diving operations using SSBA

Unit of competency
National Code
SFIDIV302
State Code
OAR75
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
21/06/2019
View on TGA
State Implementation and Classification
Approved Date
21/10/2019
Field of Education
030717 - Plant And Machine Operations
Original Release Date
21/10/2019
Nominal Hours
30
Description
This unit of competency describes the skills and knowledge required to dive to a maximum depth of 30 metres using surface-supplied breathing apparatus (SSBA) and complete occupational post-dive activities. It includes the ability to check and connect equipment, prepare a dive plan, carry out an open water dive and post-dive equipment checks. This unit applies to individuals who work as occupational divers in the seafood industry undertaking tasks in collecting or tending aquatic animals, cleaning and maintenance, retrieval and water sampling and pest control during diving operations.Occupational licensing, legislative and certification requirements apply to this unit but vary according to state/territory requirements. Occupational diving is regulated independently by each state and territory workplace health and safety authority. Users are advised to check with the relevant authority to confirm current requirements.
Notes
Elements and Performance Criteria
1. Prepare for diving operations using SSBA
  • 1.1 Select, check and prepare equipment for an SSBA diving operation
  • 1.2 Ensure defective equipment is marked and removed from service by the person in charge of the diving operation
  • 1.3 Don personal protective equipment and diving equipment appropriate to the type and duration of the dive in the correct sequence
  • 1.4 Connect and check all surface-supply equipment for correct function, line-up and readiness
  • 1.5 Connect and check the reserve air-supply equipment for correct function and readiness
  • 1.6 Plan dive, select and check necessary tools, and conduct a risk assessment
  • 1.7 Ensure the dive is recorded by the person in charge of the diving operation
2. Perform open water SSBA diving operations
  • 2.1 Undertake open water SSBA diving operations to a maximum depth of 30 metres according to accepted industry occupational diving guidelines
  • 2.2 Follow decompression and emergency procedures according to industry occupational diving guidelines
  • 2.3 Undertake tender duties in an SSBA diving operation according to industry occupational diving guidelines and workplace procedures
  • 2.4 Establish and maintain effective communication with surface and dive team
  • 2.5 Operate SSBA while divers are in the water
3. Maintain effective work relationships within a dive team
  • 3.1 Maintain effective teamwork during dive operations
  • 3.2 Follow routine instructions according to dive plan and directions from team members
4. Complete activities after SSBA dive
  • 4.1 Remove personal protective equipment and diving equipment on completion of the SSBA diving operation
  • 4.2 Carry out post-dive equipment checks and report faults
  • 4.3 Decontaminate, clean and store equipment according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WI713 SFIDIVE310A Perform diving operations using SSBA Unit of competency