Unit of competency Outline

Date retreived
22/07/2026 8:48 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Shoot screen content in a multi-camera environment

Shoot screen content in a multi-camera environment

Unit of competency
National Code
CUACAM402
State Code
AWJ73
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
15/01/2016
View on TGA
State Implementation and Classification
Approved Date
21/07/2016
Field of Education
100701 - Audio Visual Studies
Original Release Date
21/07/2016
Nominal Hours
60
Description
This unit describes the skills and knowledge required to shoot television content in a multi-camera environment, in a studio or on location. Cameras can be in fixed positions, on pedestals or handheld.It applies to individuals who work under direction and apply a broad range of technical, creative and communication skills as members of a production team. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Plan shots and camera movements
  • 1.1 Contribute to discussions about visual interpretation, locations and resources in pre-production meetings
  • 1.2 Liaise with production personnel to confirm planned shots and camera movements meet technical and script criteria
  • 1.3 Rehearse own camera shots and moves to ensure they align with overall camera plan
  • 1.4 Create shot lists for use during rehearsals, recordings or live transmissions
  • 1.5 Appraise ideas for shots, taking into account impact on schedules, technical feasibility and production requirements
  • 1.6 Anticipate work health and safety (WHS) requirements as they apply to preparation and implementation of shoots
2. Set up for shoots
  • 2.1 Assemble camera equipment and accessories to meet predetermined camera positions and movements
  • 2.2 Position camera for shots to ensure safety of production personnel, talent and general public
  • 2.3 Check camera cables run from outlet points do not impede camera movements required for productions
  • 2.4 Confirm with relevant personnel that cameras are lined up and matched to meet production requirements
  • 2.5 Charge and install headsets and check talkback function is operational to allow communication with production personnel
  • 2.6 Liaise with other production personnel and talent to maximise creative outcomes
3. Shoot content
  • 3.1 Participate in rehearsals and adjust shot lists and schedules as required
  • 3.2 Re-create camera shots and movements during recording, as established in rehearsal
  • 3.3 Communicate any variations to predetermined plan to production personnel
  • 3.4 Respond promptly to cues from production personnel
  • 3.5 Consider shots and angles from other camera operators when assessing effectiveness of cuts and dissolves between shots
  • 3.6 Move cameras without impeding operation of other crew members
  • 3.7 Apply safe work practices at all times
4. Wrap up shoots
  • 4.1 Dismantle, pack and store equipment and accessories as required
  • 4.2 Check locations are left in original state
  • 4.3 Participate in production debriefings and reflect on own performance, noting areas for future improvement
  • 4.4 Complete necessary documentation
No information
No information
Replaces
State Code National Code Title Type
D1089 CUFCAM402A Shoot television content in multi-camera environment Unit of competency
Replaced By
State Code National Code Title Type
ODH95 CUACAM412 Shoot screen content in a multi-camera environment Unit of competency