Unit of competency Outline

Date retreived
23/07/2026 12:28 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Restore and renovate solid plasterwork

Restore and renovate solid plasterwork

Unit of competency
National Code
CPCCSP3004
State Code
OCP66
TGA Status
Current
DTWD Status
Approved
Current Release Number
3.00
Current Release Date
24/12/2024
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
040317 - Plastering
Original Release Date
01/06/2021
Nominal Hours
120
Description
This unit specifies the skills and knowledge required to apply processes and techniques to repair damage in lime mortar cement render and solid plaster surfaces. It includes restoration and renovation of plasterwork and lettering.A person working at this level would be expected to take responsibility for organising and completing tasks assigned to them, without close supervision.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of unit CPCWHS1001Prepare to work safely in the construction industry meets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan and prepare to restore and renovate solid plaster work.
  • 1.1 Read and interpret work instructions and plan sequence of work.
  • 1.2 Plan all work to comply with laws and regulations, the National Construction Code (NCC), Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications, and workplace requirements.
  • 1.3 Select and use personal protective equipment (PPE) for each stage of the task.
  • 1.4 Inspect work site, assess hazards and apply risk controls, including required signage and barricades.
  • 1.5 Select tools and equipment, check for serviceability and report any faults.
  • 1.6 Select materials required for task, calculate quantities, handle safely and prepare and position ready for use.
2 Select restoration or renovation method.
  • 2.1 Determine extent and type of restoration or renovation by site examination and from plans and specifications.
  • 2.2 Prepare drawing and template of damaged area to profile/moulding shape of existing work.
3 Restore plasterwork.
  • 3.1 Remove flaky, damaged and loose plasterwork.
  • 3.2 Clean and prepare substrate.
  • 3.3 Mix materials to ratios suitable for task.
  • 3.4 Apply and finish solid render to match existing render finish, details and alignment.
  • 3.5 Restore surrounding plasterwork.
4 Renovate lettering and monograms.
  • 4.1 Prepare surface for renovation to specification.
  • 4.2 Construct monograms and lettering panels in sand and cement mortar to match detail for restorations.
  • 4.3 Mix materials to ratios suitable for task.
  • 4.4 Apply materials to fine finish with sharp arises, square returns and plumb/level to requirements.
5 Clean up.
  • 5.1 Clear work area, dispose of materials, and reuse or recycle in compliance with legislation, regulations and codes of practice.
  • 5.2 Clean, check, maintain and store tools and equipment in accordance with manufacturers’ specifications.
No information
No information
Replaces
State Code National Code Title Type
W9547 CPCCSP3004A Restore and renovate solid plasterwork Unit of competency
State Code National Code Title Type
BGD3 CPC31020 Certificate III in Solid Plastering Qualification