Unit of competency Outline

Date retreived
23/07/2026 7:20 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install mobile telecommunications in motor vehicles

Install mobile telecommunications in motor vehicles

Unit of competency
National Code
ICTRFN302
State Code
AWD96
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
14/01/2016
View on TGA
State Implementation and Classification
Approved Date
05/07/2016
Field of Education
031309 - Communications Equipment Installation And Maintenance
Original Release Date
05/07/2016
Nominal Hours
80
Description
This unit describes the skills and knowledge required to fit radio transceivers and cellular mobile phone handsets with powered docking cradles and to install peripheral components such as external antenna, microphone, loudspeaker, mobile data terminals and global positioning systems (GPS) in domestic, commercial or industrial motor vehicles.It applies to individuals working as installers and technicians who liaise with clients to determine all technical requirements and interpret all regulatory and legislative requirements appropriately.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Plan for installation of mobile telecommunications in motor vehicles
  • 1.1 Obtain relevant legislation, codes, regulations and standards and follow work health and safety (WHS) and environmental requirements for given work
  • 1.2 Obtain mobile telecommunications equipment and manufacturer's installation documentation
  • 1.3 Determine critical automotive electrical systems that need to be considered during installation process to prevent any damage to vehicle system
  • 1.4 Verify installation requirements from client and advise client of issues affecting performance
  • 1.5 Obtain tools and test equipment required for safe work practices
2. Install mobile equipment
  • 2.1 Attach primary mobile telecommunications equipment to vehicle using fixing and fastening hardware, clear of air bag deployment and according to client, vehicle and equipment manufacturer and WHS requirements
  • 2.2 Wire primary mobile telecommunications equipment to vehicle electrical system using industry wiring practices without impacting on other electrical systems
  • 2.3 Attach and wire peripheral mobile telecommunications equipment and components of installation to client’s and manufacturer's requirements
  • 2.4 Replace any existing fittings or vehicle components removed during installation and restore to original condition
  • 2.5 Test completed installation to verify that operation of critical automotive electrical systems have not been affected, and rectify if required
3. Complete installation
  • 3.1 Restore vehicle and worksite to client's satisfaction by disposing of waste materials according to environmental requirements
  • 3.2 Note and document any damage that may have occurred during installation and report according to enterprise procedures
  • 3.3 Instruct client on operation of installed equipment
  • 3.4 Complete all administrative tasks and file according to enterprise requirements
No information
No information
Replaces
State Code National Code Title Type
D3399 ICTRFN3070A Install mobile telecommunications in motor vehicles Unit of competency