Unit of competency Outline

Date retreived
22/07/2026 10:36 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Ground spread fertiliser and soil ameliorant

Ground spread fertiliser and soil ameliorant

Unit of competency
National Code
AHCMOM306
State Code
BAS35
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
19/12/2018
View on TGA
State Implementation and Classification
Approved Date
12/01/2017
Field of Education
050101 - Agricultural Science
Original Release Date
12/01/2017
Nominal Hours
50
Description
This unit of competency describes the skills and knowledge required to prepare and undertake activities required to ground spread fertiliser and soil ameliorants.This unit applies to individuals who apply industry codes of practice and operating principles to ground spread fertiliser and soil ameliorants under broad direction, and take responsibility for their own work.All work must be carried out to comply with workplace procedures, health and safety in the workplace requirements, legislative and regulatory requirements, manufacturer specifications, sustainability and biosecurity practices.No occupational licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Confirm customer requirements
  • 1.1 Confirm with customer that fertiliser or soil ameliorant products to be spread are consistent with customer order
  • 1.2 Verify with customer that technical specification of products are acceptable for job
  • 1.3 Confirm fertiliser order documentation with customer to enable depot and factory traceability
  • 1.4 Document spreading services agreement according to workplace requirements and industry code of practice
2. Identify features of target area
  • 2.1 Identify and agree with customer on the location and boundaries of area to be treated and document according to workplace requirements and industry code of practice
  • 2.2 Visually assess soil type and condition or seek advice from customer
  • 2.3 Identify environmentally sensitive areas and plan operations to ensure minimum adverse impact and compliance with required buffer zones
  • 2.4 Inspect and identify features that present a hazard to the operation, consult with customer and take appropriate action to minimise risks
  • 2.5 Identify the location of services and utilities in consultation with customer and adjust proposed spreading operation
  • 2.6 Identify local weather and climate conditions and take into account potential impacts when preparing for operation
3. Perform pre-spreading checks
  • 3.1 Determine rate of spreading and calculate buffer zone allowance
  • 3.2 Ensure machinery and equipment are clean of soil and/or plant material before it is moved onto site
  • 3.3 Prepare, set up, calibrate and confirm serviceability of machinery and equipment according to workplace procedures and manufacturer instructions
4. Spread products
  • 4.1 Select and maintain personal protective equipment to be used by operator and all personnel involved in spreading tasks
  • 4.2 Fit and use personal protective equipment according to job requirements and task to be completed
  • 4.3 Apply fertiliser or soil ameliorant in a manner that complies with guidelines on buffer zones and minimises run off into waterways and drains
  • 4.4 Monitor meteorological conditions before and during application and modify operations as required
  • 4.5 Identify environmental and biosecurity implications associated with fertiliser or ameliorant application and minimise impact
  • 4.6 Follow any existing site quarantine or biosecurity protocols
  • 4.7 Continually monitor workplace hazards and risks, and ensure safety of self, other personnel and equipment
5. Shut down equipment and undertake maintenance requirements
  • 5.1 Conduct shut down procedures required for ground spread of fertiliser and ameliorant equipment
  • 5.2 Clean and check serviceability of machinery, equipment and hand tools
  • 5.3 Perform basic preventative maintenance
  • 5.4 Record faults for remedial action according to workplace procedures
  • 5.5 Return machinery, equipment and hand tools to depot or storage area according to workplace procedures
  • 5.6 Complete operational records according to workplace procedures and industry code of practice
No information
No information
Replaces
State Code National Code Title Type
D7019 AHCMOM306A Ground spread fertiliser and soil ameliorant Unit of competency