Unit of competency Outline

Date retreived
22/07/2026 2:37 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct mechanical tests on milking machines

Conduct mechanical tests on milking machines

Unit of competency
National Code
AHCDRY305
State Code
ODV18
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
15/02/2022
View on TGA
State Implementation and Classification
Approved Date
31/05/2022
Field of Education
030717 - Plant And Machine Operations
Original Release Date
31/05/2022
Nominal Hours
135
Description
This unit of competency describes the skills and knowledge required to mechanically test and make recommendations on the performance of milking machines used on dairy farms.This unit applies to individuals who conduct mechanical tests as part of service and maintenance of milking machines for dairy facilities.All work is carried out to comply with workplace policies and procedures, according to state/territory work health and safety, animal welfare, environmental and biosecurity legislation, regulations and standards that apply to the workplace.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for testing of milking machine
  • 1.1 Identify and confirm testing requirements with facility records and personnel
  • 1.2 Identify facility health and safety hazards, assess risks and determine control measures
  • 1.3 Select testing tools and equipment and check for serviceability
  • 1.4 Prepare and fit required personal protective equipment (PPE)
2. Establish milking machine specifications
  • 2.1 Establish herd details and health status
  • 2.2 Determine expected performance from machine specifications, testing procedures and performance criteria
  • 2.3 Assess and record condition of components
3. Calculate required milking machine performance
  • 3.1 Calculate effective reserve based on facility specifications
  • 3.2 Calculate vacuum pump capacity from effective reserve
  • 3.3 Record manufacturer recommended component specification and matching
4. Measure milking machine performance
  • 4.1 Measure working vacuum levels against required performance
  • 4.2 Adjust vacuum to optimise milking facility performance
  • 4.3 Measure and report air consumption of component groups and pipeline leakage
  • 4.4 Test pulsators according to procedures and report results relative to manufacturer performance recommendations
  • 4.5 Establish recommended air consumption of components and measure consumption according to testing procedures
5. Make recommendations to optimise machine performance
  • 5.1 Interpret test results against desired performance and herd details
  • 5.2 Provide recommendations and written report on safety considerations for specific installation tested
  • 5.3 Provide recommendations on milking facility performance
  • 5.4 Complete report on component condition according to manufacturer requirements
No information
No information
Replaces
State Code National Code Title Type
BAN61 AHCMKH305 Mechanically test milking machines Unit of competency