Unit of competency Outline

Date retreived
22/07/2026 9:51 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Produce angled and curved furniture using manufactured board

Produce angled and curved furniture using manufactured board

Unit of competency
National Code
MSFFM3003
State Code
WI424
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
030113 - Cabinet Making
Original Release Date
19/06/2014
Nominal Hours
64
Description
This unit of competency covers constructing and assembling manufactured board furniture using angled and curved construction methods.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare for work
  • 1.1 Work instructions are used to determine job requirements, including design, tolerances, process, materials, finish and quantity
  • 1.2 Construction and assembly sequence are planned
  • 1.3 Procedures are determined for checking quality at each stage of the process
  • 1.4 Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work
  • 1.5 Suitable work area is selected for the task
  • 1.6 Preparatory drawings and set-outs for tasks are completed
  • 1.7 Cutting list for components is developed
  • 1.8 Materials are selected following work instructions
  • 1.9 Tools and equipment suitable for construction are identified and checked for safe and effective operation
2 Complete construction
  • 2.1 Materials are set out and prepared according to work instructions and components are marked according to industry practices
  • 2.2 Tools, machines and equipment are used in accordance with safety requirements and manufacturer specifications
  • 2.3 Materials are bent and formed in accordance with the plan
  • 2.4 Components are manufactured and checked against set-out for tolerances, fit and accuracy
  • 2.5 Components are assembled and checked against set-out for accuracy, fit, twist and distortion
  • 2.6 Doors, drawers and shelves are assembled and fitted
  • 2.7 Product is prepared for final finish, including the removal of bruises, scratches, dents and marks
  • 2.8 Product is checked against plans at identified checkpoints
3 Finalise operation and maintain equipment
  • 3.1 Work area is cleaned, hand and/or power tools and equipment are cleaned, maintained and stored in accordance with workplace procedures
  • 3.2 Machinery is cleaned and left in a safe mode
  • 3.3 Faulty and/or defective equipment is tagged and reported in accordance with workplace practices
  • 3.4 Unused hardware is collected and stored for re-use or disposal following workplace procedures
  • 3.5 Waste and scrap materials are dealt with following workplace procedures
No information
No information
Replaces
State Code National Code Title Type
W8612 LMFFM3003B Produce angled and curved furniture using manufactured board Unit of competency
Replaced By
State Code National Code Title Type
OEK59 MSFFM3026 Produce angled and curved components using manufactured board Unit of competency
State Code National Code Title Type
J739 MSF31113 Certificate III in Cabinet Making Qualification
J730 MSF30213 Certificate III in Furniture Making Qualification