Unit of competency Outline

Date retreived
23/07/2026 11:32 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Produce schematic drawings for hydraulic and pneumatic fluid power systems

Produce schematic drawings for hydraulic and pneumatic fluid power systems

Unit of competency
National Code
MEM09213
State Code
OEV52
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
19/12/2022
View on TGA
State Implementation and Classification
Approved Date
19/04/2023
Field of Education
039999 - Engineering And Related Technologies, N.e.c.
Original Release Date
19/04/2023
Nominal Hours
60
Description
This unit of competency defines the skills and knowledge required to produce detailed engineering drawings for hydraulic and pneumatic fluid power systems to Australian Standard (AS) 1100.101 Technical drawing - General principles. Critical dimensions and specifications are predetermined, and drawings or models are developed with or without the use of computer-aided design (CAD) systems.This unit is suitable for individuals undertaking drafting in manufacturing and other industries that use fluid power equipment and applies to preparing drawings of whole or part of the fluid power system.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Determine schematic drawing requirement
  • 1.1 Follow standard operating procedures (SOPs) and comply with work health and safety (WHS) requirements at all times
  • 1.2 Determine purpose, scope and information requirements for drawing
  • 1.3 Interpret available information relevant to project and work requirements, and identify and address further information needs
  • 1.4 Identify and prepare equipment required to complete work
  • 1.5 Identify and apply relevant codes, standards and symbols used in the mechanical services industry for installation drawings
  • 1.6 Identify and access organisational files, templates and symbols required for work
  • 1.7 Identify the features and operational function of basic pneumatic and hydraulic systems
2. Identify system components
  • 2.1 Identify gas or fluid used in the fluid power system
  • 2.2 Identify hydraulic system components and their function
  • 2.3 Identify pneumatic system components and their function
  • 2.4 Identify environmental implications of inefficient fluid power systems and strategies for minimising impact
  • 2.5 Read and interpret the applicable sections of manufacturer’s tables, charts, catalogues and specifications
3. Produce hydraulic and pneumatic system schematic drawing
  • 3.1 Apply operating principles and specifications of hydraulic and pneumatic system and components to drawing work
  • 3.2 Complete schematic drawing according to industry standard for hydraulic and pneumatic fluid power systems, including the use of accurate symbols and notations
  • 3.3 Present schematic drawing according to organisational requirements
  • 3.4 Store schematic drawings in accordance with SOPs
No information
No information
Replaces
State Code National Code Title Type
WE068 MEM09213A Produce schematic drawings for hydraulic and pneumatic fluid power systems Unit of competency