Unit of competency Outline

Date retreived
23/07/2026 2:35 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Service bicycle wheels and hubs

Service bicycle wheels and hubs

Unit of competency
National Code
AURBTJ002
State Code
AXE41
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030599 - Automotive Engineering And Technology, N.e.c.
Original Release Date
13/07/2016
Nominal Hours
20
Description
This unit describes the performance outcomes required to service bicycle wheels and hubs. It involves preparing for the work, selecting and using specialist tools and equipment, inspecting, removing, adjusting and refitting the bicycle wheels and hubs, and completing workplace processes and documentation. It applies to those working in the bicycle retail, service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to service bicycle wheels and hubs
  • 1.1 Job requirements, including wheel and hub service needs, are determined from workplace instructions
  • 1.2 Bicycle manufacturer specifications and service instructions for wheels and hubs are researched and interpreted
  • 1.3 Condition of bicycle wheels and hubs is inspected for faults and worn or damaged components using visual inspection methods and by comparing measurements against manufacturer specifications
  • 1.4 Hazards associated with the work are identified and risks are managed
  • 1.5 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
  • 1.6 Work area is prepared and work is planned to avoid damage to bicycle, minimise waste and use time efficiently
2. Carry out service of wheels and hubs
  • 2.1 Bicycle wheels are removed according to workplace procedures and manufacturer specifications
  • 2.2 Wheels and hubs are serviced according to work plan, manufacturer specifications, and safety and environmental requirements
  • 2.3 Serviced wheels and hubs are refitted to bicycle and tested and adjusted as required according to job requirements and workplace procedures
3. Complete work processes
  • 3.1 Final inspection is made to ensure work meets workplace expectations and bicycle is presented ready for use
  • 3.2 Problems outside own area of responsibility are reported to appropriate person
  • 3.3 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 3.4 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 3.5 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF056 AURBTJ2002 Service bicycle wheels and hubs Unit of competency
Replaced By
State Code National Code Title Type
OCK40 AURBTJ102 Service bicycle wheels and hubs Unit of competency