Unit of competency Outline

Date retreived
23/07/2026 4:17 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply casts

Apply casts

Unit of competency
National Code
HLTCT401C
State Code
D5842
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
25/03/2011
View on TGA
State Implementation and Classification
Approved Date
02/08/2011
Field of Education
061799 - Rehabilitation Therapies, N.e.c.
Original Release Date
02/08/2011
Nominal Hours
50
Description
DescriptorThis unit of competency describes the skills and knowledge required to fabricate and apply casts
Notes
Elements and Performance Criteria
1. Prepare to apply casts
  • 1.1 Assemble and check equipment and materials for applying casts to ensure that it is in clean and in working order
  • 1.2 Receive and confirm if in doubt requirements for application of casts with relevant personnel
  • 1.3 Assess client's condition and identify precautions and potential complications of applying cast
  • 1.4 Explain procedure to client and obtain client consent/agreement
  • 1.5 Provide the client opportunities to ask questions and discuss areas of concern
  • 1.6 Meet the comfort and safety needs of the client and applicator
  • 1.7 Review the condition of wound and pin site and refer to relevant personnel as required
2. Apply casts
  • 2.1 Position the area to which cast is to be applied in accordance with industry best practice
  • 2.2 Meet the comfort and safety needs of the client and applicator
  • 2.3 Client's specific needs in relation to application of casts are identified
  • 2.4 Apply cast according to instructions and to meet client's needs
  • 2.5 Achieve the correct moulding of cast
  • 2.6 Complete documentation
3. Undertake post application procedures
  • 3.1 Clean client at completion of procedure
  • 3.2 Observe that the neurovascular status of limb to is within normal limits
  • 3.3 Check the fit and functionality of cast
  • 3.4 Provide client and carer with written and verbal advice for care of cast and limb
  • 3.5 Fit client with sling, heel/overshoes and ambulation aids, as required
  • 3.6 Instruct client on correct use of ambulation aids and ensure client is safe
  • 3.7 Arrange appropriate support for client
4. Clean working environment
  • 4.1 Dispose of waste in accordance with waste management policies
  • 4.2 Clean equipment in accordance with manufacturer's specifications and stored safely
  • 4.3 Clean work surfaces in accordance with infection control guidelines
No information
No information
Replaces
State Code National Code Title Type
C9146 HLTCT401B Apply casts Unit of competency
Replaced By
State Code National Code Title Type
WD098 HLTCT401D Apply casts Unit of competency
No information