Unit of competency Outline
Date retreived
23/07/2026 7:00 AM AWST
23/07/2026 7:00 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Monitor and operate network systems
Monitor and operate network systems
Unit of competency
National Code
NWPNET004
NWPNET004
State Code
AVY82
AVY82
TGA Status
Replaced
Replaced
DTWD Status
Transition (Replaced)
Transition (Replaced)
State Implementation and Classification
Approved Date
15/04/2016
Field of Education
030907 - Water And Sanitary Engineering
Original Release Date
15/04/2016
Nominal Hours
35
Description
This unit describes the skills required to monitor and operate network systems including planning and preparing work site and monitoring performance and usage of distribution.This unit applies to those working as field and operational staff with responsibility for the water distribution systems and practical delivery, monitoring and regulation of reticulated water distribution services. The skills and knowledge described in this unit must be applied within the legislative, regulatory and policy environment in which they are carried out. Organisational policies and procedures must be consulted and adhered to.Those undertaking this unit would work under indirect supervision, while performing routine tasks, in a familiar context, ensuring minimum damage to the environment. No licensing, legislative or certification requirements apply to unit at the time of publication.
Notes
Elements and Performance Criteria
1. Establish system constraints and plan and prepare work site
- 1.1 Conduct risk assessment for environmental, safety and water quality factors.
- 1.2 Determine system layout and operational problem areas from specifications or instructions.
- 1.3 Plan work required to operate and adjust water reticulation system.
- 1.4 Select and check equipment and personal protective equipment to meet safety requirements of task and site.
- 1.5 Identify and locate isolation valves and hydrants.
- 1.6 Collect and report data on system performance and usage.
2. Operate pump station
- 2.1 Identify and set or adjust pump station components.
- 2.2 Check and report on reservoir.
- 2.3 Identify system faults and adjust as required.
3. Monitor performance and usage of distribution systems
- 3.1 Identify fluctuations in supply, system changes, community demands and water quality complaints.
- 3.2 Collect and report data on system performance and usage.
- 3.3 Collect and record water samples and monitor water quality.
4. Regulate flow and pressure and identify issues
- 4.1 Inspect flow regulating systems and adjust to meet demand requirements.
- 4.2 Regulate and divert flows to facilitate repair or emergency activities.
- 4.3 Monitor and adjust pressure to meet optimum delivery.
- 4.4 Investigate and report pressure fluctuations.
- 4.5 Document and report reticulation and distribution information.
No information
No information
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OBN93 | NWPNET028 | Monitor and operate network systems | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| AYW4 | NWP20115 | Certificate II in Water Industry Operations | Qualification |