Unit of competency Outline

Date retreived
23/07/2026 8:36 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Lay paving

Lay paving

Unit of competency
National Code
AHCLSC204
State Code
BAO08
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
27/06/2016
View on TGA
State Implementation and Classification
Approved Date
12/01/2017
Field of Education
040399 - Building, N.e.c.
Original Release Date
12/01/2017
Nominal Hours
30
Description
This unit of competency describes the skills and knowledge required to lay modular paving in landscape projects.This unit applies to individuals who work under general supervision and exercise limited autonomy with some accountability for their own work. They undertake defined activities and work in a structured context.No occupational licensing, legislative or certification requirements are known to apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Plan and prepare for paving work
  • 1.1 Confirm work instructions with the supervisor
  • 1.2 Prepare tools and equipment
  • 1.3 Select, use and maintain personal protective equipment (PPE) and clothing
  • 1.4 Check the quantity and quality of materials to make sure they conform to the requirements of the job plans
  • 1.5 Identify work health and safety hazards, assess risks and report to supervisor
2. Set out and prepare paving area
  • 2.1 Mark out the area to be paved according to site plan
  • 2.2 Assist with pegging the reduced levels of the proposed paving area according to site plans and supervisor's instructions
3. Undertake ground preparation
  • 3.1 Excavate the area to shape, depth and dimensions to sub-base level
  • 3.2 Trim the sub base to the designated level and falls to ensure that the final level of paving can be achieved
  • 3.3 Construct drainage systems as necessary according to site plan
  • 3.4 Place and compact base material to the required finished level
4. Lay bedding material
  • 4.1 Establish screed rails to ensure the bedding course is maintained
  • 4.2 Spread bedding material loosely over the area to ensure the designated bedding depth can be attained
  • 4.3 Level bedding material to the designated level and falls
5. Lay pavers to a given pattern
  • 5.1 Set grid string lines to required levels to ensure the designated pattern of the project is attained and to maintain straight lines of components
  • 5.2 Set out pavers to the required dimensions and pattern
  • 5.3 Lay whole pavers and compact to the established finish level
  • 5.4 Mark, cut and fit pavers to fill gaps in the pattern within nominated tolerances
  • 5.5 Install permanent edge constraints to prevent movement of pavers
  • 5.6 Spread sand on the paved area and compact to the finished level
6. Clean site and store tools and equipment
  • 6.1 Sweep paving to produce a clean and flat surface free of debris
  • 6.2 Dispose of or recycle soil and waste material from the site to ensure minimal impact on the environment
  • 6.3 Clean and store all tools and equipment
No information
No information
Replaces
State Code National Code Title Type
D6913 AHCLSC204A Lay paving Unit of competency
Replaced By
State Code National Code Title Type
ODU33 AHCLSC209 Lay paving Unit of competency
State Code National Code Title Type
BDE6 AHC20416 Certificate II in Horticulture Qualification
BDE7 AHC21616 Certificate II in Landscaping Qualification