Unit of competency Outline

Information current as of
19/10/2026 9:48 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Rework faulty production engines

Rework faulty production engines

Unit of competency
National Code
AUMATE001
State Code
WH908
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
10/01/2014
View on TGA
State Implementation and Classification
Approved Date
11/03/2014
Original Release Date
10/01/2014
Nominal Hours
50
Field of Education
030503 - Vehicle Mechanics
Description
This unit describes the performance outcomes required to rework faulty engines based on test results that identify operating inconsistencies or faults.It applies to those in an automotive and related component manufacturing environment.No licensing, legislative or certification requirements apply to this unit at the time of publication.
General notes
N/A
Elements and Performance Criteria
1. Plan and prepare
  • 1.1 Workplace procedures are identified and applied
  • 1.2 Work instructions, including relevant inspection reports and forms and quality requirements, are identified, confirmed and applied
  • 1.3 Tools and equipment for reworking engine are identified and selected, and checked for faults
  • 1.4 Materials appropriate to the work application are identified, obtained and prepared
2. Confirm test findings
  • 2.1 Engine is tested to simulate normal operating conditions
  • 2.2 Computerised or physical tests are conducted on the reported faults of the engine against designated performance specifications
  • 2.3 Results of tests are confirmed and documented
3. Rectify engine fault
  • 3.1 Fault is identified and diagnosed, and suitable repair is planned
  • 3.2 Rectification is applied according to engineering specifications
  • 3.3 Engine is re-tested to ensure rework has eliminated the fault and final adjustments are made
  • 3.4 Engine is transferred to the designated holding area
4. Complete work processes
  • 4.1 Work area is cleaned, and materials disposed of, reused or recycled according to workplace procedures
  • 4.2 Tools and equipment are cleaned, checked, maintained and stored according to workplace procedures
  • 4.3 Faulty equipment is identified, tagged and reported
  • 4.4 Documentation is completed, outlining work conducted and outcome, according to workplace procedures
No information
No information
No information