Unit of competency Outline

Date retreived
22/07/2026 3:18 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Inspect and service clutch systems

Inspect and service clutch systems

Unit of competency
National Code
AURTTX005
State Code
AXA22
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030503 - Vehicle Mechanics
Original Release Date
13/07/2016
Nominal Hours
10
Description
This unit describes the performance outcomes required to inspect and service clutch systems. It involves preparing for the task, inspecting the system, reporting the inspection findings, servicing and adjusting the system, and completing workplace processes and documentation.It applies to those working in the automotive service and repair industry. The clutch systems include those of agricultural machinery, heavy commercial vehicles, light vehicles, mobile plant machinery, motorcycles or outdoor power equipment.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to inspect and service clutch system
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Servicing information is sourced and interpreted
  • 1.3 Hazards associated with the work are identified and risks are managed
  • 1.4 Tools, equipment and materials are selected and checked for serviceability
2. Inspect clutch system
  • 2.1 Inspection is carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements
  • 2.2 Inspection results are compared with manufacturer specifications
  • 2.3 Inspection findings are reported according to workplace procedures, including recommendations for necessary repairs or adjustments
3. Service clutch system
  • 3.1 Service and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
  • 3.2 Post-service testing is carried out according to workplace procedures
4. Complete work processes
  • 4.1 Final inspection is made to ensure work is to workplace expectations and vehicle or machinery is presented ready for use
  • 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  • 4.3 Tools and equipment are checked and stored according to workplace procedures
  • 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF450 AURTTX2005 Inspect and service clutch systems Unit of competency
Replaced By
State Code National Code Title Type
OAK11 AURTTX015 Inspect and service clutch systems Unit of competency