Unit of competency Outline
Date retreived
22/07/2026 6:05 PM AWST
22/07/2026 6:05 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Work safely with molten metals/glass
Work safely with molten metals/glass
Unit of competency
National Code
MEM13004B
MEM13004B
State Code
W5506
W5506
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
29/08/2014
Field of Education
061301 - Occupational Health And Safety
Original Release Date
29/08/2014
Nominal Hours
18
Description
This unit covers working safely with molten metals or glass including the appropriate using personal protective equipment (PPE), identifying and responding to emergency procedures, observing safe work practices, and identifying the hazardous conditions in a heavy engineering environment.
Notes
Elements and Performance Criteria
1. Identify the need for the use of personal protective equipment
- 1.1. Appropriate personal protective equipment is identified and used correctly, as specified in standard operating procedures (SOP) and OHS information relating to the specific hazard(s).
2. Adhere to emergency procedures for working with molten metal and glass
- 2.1. Emergency equipment is located and used in accordance with workplace policies and procedures.
- 2.2. Responses to emergency procedures are demonstrated as detailed in approved safety procedures and instructions.
3. Identify, assess and control hazardous conditions operating in a heavy engineering environment
- 3.1. Hazards are identified and reported and planning is undertaken to maintain a healthy and safe work environment.
- 3.2. Workplace procedures and work instructions for controlling risks are followed accurately.
4. Observe good OHS practices
- 4.1. Hazardous areas and materials associated with molten metal/glass are identified and potential risks are identified.
- 4.2. Safety signs and symbols are identified and understood.
- 4.3. Equipment (including personal protective equipment) is used according to specifications and standard operating procedures.
- 4.4. Personal protective equipment is inspected and maintained in good order and stored for reuse.
- 4.5. Hazardous items associated with task are identified and removed from hot material area if required and assessed and controlled.
- 4.6. Housekeeping duties are performed according to standard operating procedure to maintain a safe working environment and include the safe use, accessibility and maintenance of PPEs.
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Personal protective equipment
Face protection
Eye protection
Respiratory protection
Hearing protection
Hand protection
Clothing and footwear protection
Risk
Likelihood and consequences of injury or damage
Hazardous material
Hot material
Molten metals
Molten glass and associated products etc.
Explosive materials
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Personal protective equipment
Face protection
Eye protection
Respiratory protection
Hearing protection
Hand protection
Clothing and footwear protection
Risk
Likelihood and consequences of injury or damage
Hazardous material
Hot material
Molten metals
Molten glass and associated products etc.
Explosive materials
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to work safely with molten metals/glass.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.
Context of and specific resources for assessment
This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.
This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with working safely with molten metals/glass or other units requiring the exercise of the skills and knowledge covered by this unit.
Method of assessment
Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.
Guidance information for assessment
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to work safely with molten metals/glass.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.
Context of and specific resources for assessment
This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.
This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with working safely with molten metals/glass or other units requiring the exercise of the skills and knowledge covered by this unit.
Method of assessment
Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.
Guidance information for assessment
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| M0387 | MEM13.4AA | Work safely with molten metals/glass | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OAV28 | MEM13004 | Work safely with molten metals/glass | Unit of competency |