Unit of competency Outline

Information current as of
21/10/2026 9:51 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Place and finish concrete for cemetery or crematorium structures

Place and finish concrete for cemetery or crematorium structures

Unit of competency
National Code
SIFCBGM005
State Code
WG585
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
21/06/2013
View on TGA
State Implementation and Classification
Approved Date
14/08/2013
Original Release Date
21/06/2013
Nominal Hours
10
Field of Education
040309 - Bricklaying And Stonemasonry
Description
This unit describes the performance outcomes, skills and knowledge required to place and finish concrete for cemetery or crematorium structures. It applies to cemetery and crematorium staff involved in building and grounds maintenance. It involves working under supervision with some responsibility, and performing work according to work health and safety, relevant legislation and workplace policies and procedures.No licensing, legislative or certification requirements apply to this unit at the time of publication.
General notes
N/A
Elements and Performance Criteria
1. Plan concrete work.
  • 1.1 Identify and clarify work requirements.
  • 1.2 Select and assemble tools, equipment and materials according to work requirements.
  • 1.3 Check tools and equipment for serviceability and report faults.
  • 1.4 Liaise with supervisor to identify and clarify actual or potential hazards and corrective actions.
2. Prepare and place concrete.
  • 2.1 Conduct concrete tests according to manufacturer guidelines.
  • 2.2 Transport and pour concrete on cemetery or crematoria structure.
  • 2.3 Compact concrete according to job requirements.
  • 2.4 Screed concrete according to specified levels and grades.
  • 2.5 Finish concrete surface according to job specifications.
  • 2.6 Apply curing methods according to manufacturer guidelines.
3. Clean work area and equipment.
  • 3.1 Remove waste and debris according to workplace requirements.
  • 3.2 Clear work site to cemetery presentation standards.
  • 3.3 Clean, maintain and store tools and equipment according to manufacturer guidelines and workplace requirements.
No information
No information
No information