Unit of competency Outline

Date retreived
22/07/2026 9:55 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Maintain overhead rail traction configurations

Maintain overhead rail traction configurations

Unit of competency
National Code
UETTDRRT26
State Code
OBH22
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
25/09/2019
View on TGA
State Implementation and Classification
Approved Date
04/12/2019
Field of Education
031311 - Powerline Installation And Maintenance
Original Release Date
04/12/2019
Nominal Hours
54
Description
This unit involves the skills and knowledge required to maintain overhead rail traction configurations in the electricity supply industry (ESI).It includes maintaining and repairing overlaps, cross-overs, turnouts and crossings whilst using safe working practices on or about running line/track. It also includes repairing and/or replacing electrical equipment and associated hardware, identifying and implementing traffic management plans, issuing/accepting electrical permits, isolation of systems and circuits, inspection and checks to confirm equipment and associated hardware are in a safe condition to test and/or return to service, re-commissioning tests to ensure the integrity of the traction system prior to return to service and updating of system data and/or maintenance records.The application of the skills and knowledge described in this unit may require a licence/registration to practice in the workplace.Other conditions may apply under state and territory legislative and regulatory licensing requirements which must be confirmed prior to commencing this unit.
Notes
Elements and Performance Criteria
1 Prepare to maintain overhead traction configurations
  • 1.1 Work schedules, construction plans, drawings, workplace procedures and material lists are received and confirmed
  • 1.2 Job requirements and workplace procedures are identified and communicated with relevant personnel
  • 1.3 Work health and safety (WHS)/occupational health and safety (OHS), environmental and workplace procedures for the maintenance of overhead traction configurations are obtained and confirmed for the purposes of the work to be performed
  • 1.4 Work is prioritised and sequenced for completion within acceptable timeframes following consultation with relevant personnel and in accordance with workplace procedures
  • 1.5 Hazards are identified, WHS/OHS risks assessed and control measures identified in accordance with workplace procedures
  • 1.6 Relevant work permits are obtained to access rail corridor, understood and signed in accordance with workplace procedures
  • 1.7 Plant, equipment, tools and personal protective equipment (PPE) required for work are identified, obtained and confirmed in working order
  • 1.8 Worksite is prepared to minimise risk, damage to property, commerce and individuals in accordance with workplace procedures
  • 1.9 Traffic management plan is confirmed as being applied in accordance with workplace procedures
  • 1.10 Environmental constraints applicable to work are identified and control measures applied
2 Perform maintenance of overhead traction configurations
  • 2.1 WHS/OHS, sustainable energy and environmental principles and practices are monitored and followed to reduce incidents in accordance with workplace procedures
  • 2.2 Requirements for lifting and/or climbing and/or working at heights and the use of power tools/equipment are followed in accordance with workplace procedures
  • 2.3 Systems and circuits are checked, isolated and proved safe to work on in accordance with workplace procedures
  • 2.4 Maintenance of overhead traction configurations is completed in agreed timeframes, to quality standards and with minimum waste in accordance with workplace procedures
  • 2.5 Electrical equipment and associated hardware are tested in accordance with job requirements and workplace procedures
  • 2.6 Maintenance, including repair and/or replacement of overhead traction configurations, is completed in accordance with work schedule, job requirements and workplace procedures
  • 2.7 Unplanned events are responded to in accordance with workplace procedures
  • 2.8 Quality checks of work are undertaken in accordance with workplace procedures
3 Complete maintenance of overhead traction configurations
  • 3.1 Completed work is checked against work schedule, construction plans and drawings for compliance and anomalies are reported in accordance with workplace procedures
  • 3.2 Worksite is rehabilitated, cleaned up and made safe in accordance with workplace procedures
  • 3.3 Tools, equipment and surplus resources and materials are, where appropriate, cleaned, checked and returned to storage in accordance with workplace procedures
  • 3.4 Relevant work permits are signed off after final inspections and recommissioning checks and the system is energised, tested and returned to service in accordance with workplace procedures
  • 3.5 Work records, reports and/or documentation are completed in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WD718 UETTDRRT26A Maintain overhead rail traction configurations Unit of competency
Replaced By
State Code National Code Title Type
ODM45 UETDRRT008 Maintain overhead rail traction configurations Unit of competency