Unit of competency Outline

Date retreived
22/07/2026 4:28 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate machine to sew upper

Operate machine to sew upper

Unit of competency
National Code
LMTFP2005B
State Code
W7274
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
16/07/2011
View on TGA
State Implementation and Classification
Approved Date
20/10/2014
Field of Education
030109 - Footwear Making
Original Release Date
20/10/2014
Nominal Hours
40
Description
This unit covers the skills and knowledge to align and sew uppers.
Notes
Elements and Performance Criteria
1 Prepare work pieces
  • 1.1 Work bundle is received, checked and follow-up action taken including quality checks.
  • 1.2 Quality of received component parts is assessed.
  • 1.3 Work pieces are laid out in correct sequence.
2 Prepare workstation
  • 2.1 Workbench and seating are set up to achieve operator comfort and to minimise fatigue.
  • 2.2 Machine is cleaned and checked.
  • 2.3 Records are maintained.
3 Prepare machine for operation
  • 3.1 Machine settings are adjusted according to manufacturer instructions and specifications for work.
  • 3.2 Threads are selected according to specifications.
  • 3.3 Needle types, attachments and parts are checked, and worn needles and parts are changed as necessary.
  • 3.4 Stitch length is set and tested against specifications.
  • 3.5 Tension is set according to specifications.
  • 3.6 Machine is tested for correct operation.
4 Perform machine sewing
  • 4.1 Pieces are selected according to size, colour and style.
  • 4.2 Materials are accurately positioned to achieve required specifications.
  • 4.3 Seams are machined to achieve specific results.
  • 4.4 Threads are trimmed as required.
  • 4.5 Work is carried out according to OHS practices.
5 Identify poor machine performance
  • 5.1 Performance of machine is regularly checked for signs of faulty performance.
  • 5.2 Follow-up action is taken to address faulty machine performance.
6 Conduct final quality check for operations
  • 6.1 Final product is checked to ensure workplace quality requirements are met.
  • 6.2 Production faults are addressed.
7 Despatch completed work
  • 7.1 Uppers are bundled, stacked and stored or despatched.
  • 7.2 Production faults are recorded as required.
  • 7.3 Records are completed.
RANGE STATEMENT
The Range Statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.
Legislative/regulatory requirements
All work must comply with relevant Federal and State or Territory legislative or regulatory requirements.
Machines may include:
manual and computerised sewing machines where the positioning of the work may be controlled by machine guide or work marker
Operations may include:
lining stitching
back seaming
binding
bar tacking
OHS practices
OHS practices include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and may relate to:
manual handling techniques
standard operating procedures
personal protective equipment
safe materials handling
taking of rest breaks
ergonomic arrangement of workplaces
following marked walkways
safe storage of equipment
housekeeping
reporting accidents and incidents
environmental practices
The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for the Training Package.

Critical aspects of evidence
Demonstrates skills and knowledge to:
check work against ticket information and workplace standards
prepare workstation and work before commencing operations
apply machining techniques
operate at least one type of machine where the positioning of the work is controlled by machine guide or work marker
apply OHS practices in work operations
maintain accurate records

Consistency in performance
Consistently applies skills and knowledge when:
organising work
completing tasks according to instructions
working systematically with attention to detail
identifying improvements and avoiding damage
using workplace practices
using OHS practices
recording and reporting accidents and incidents
assessing operational readiness of equipment
recognising and adapting to cultural differences in the workplace, including modes of behaviour and interactions

Resource implications
Access is required to real or appropriately simulated situations, including work areas, materials and equipment, and to information on workplace practices and OHS practices.

Context for assessment
Assessment may occur on the job or in an appropriately simulated environment.

Interdependent assessment
This unit may be assessed independently or in combination with other relevant units.
Replaces
State Code National Code Title Type
AXP56 LMTPRFT03CA Machine upper - 3 Unit of competency
AXP57 LMTPRFT03DA Machine upper - 4 Unit of competency
W6567 LMTFP2005A Operate machine to sew upper Unit of competency
Replaced By
State Code National Code Title Type
BAW36 MSTFP2005 Operate machine to sew upper Unit of competency