Unit of competency Outline

Date retreived
23/07/2026 5:11 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Facilitate training in a synthetic environment

Facilitate training in a synthetic environment

Unit of competency
National Code
AVIM5004
State Code
AWP37
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
01/03/2016
View on TGA
State Implementation and Classification
Approved Date
16/08/2016
Field of Education
070109 - Teacher Education: Vocational Education And Training
Original Release Date
16/08/2016
Nominal Hours
30
Description
This unit involves the skills and knowledge required to facilitate training in a synthetic environment, in compliance with relevant regulatory requirements of the Civil Aviation Safety Authority (CASA) and national operating standards. Use of the unit for simulation training activities outside of an aviation context is in accordance with relevant regulatory, organisational or enterprise procedures.It includes planning a synthetic learning activity; preparing a trainee for these activities; and guiding, facilitating and monitoring learning. It also includes conducting post-training activities and reviewing facilitation processes.This unit addresses vocational training technical skill requirements (physical, mental and task-management abilities) related to synthetic training and assessment duties of vocational instructors and assessors, and contributes to safe and effective performance in simple and/or complex operational and training environments.Operations are conducted as part of recreational, commercial and military vocational training activities across a variety of operational contexts within Australian industry.Work is performed independently or under limited supervision as a single operator or within a team environment.Licensing, legislative, regulatory or certification requirements are applicable to this unit.Use for Defence Aviation is to be in accordance with relevant Defence Orders, Instructions, Publications and Regulations.
Notes
Elements and Performance Criteria
1 Plan a synthetic learning activity
  • 1.1 Learning strategy and/or learning program is accessed, read and interpreted to determine learning outcomes or objectives to be met and relevant delivery requirements
  • 1.2 Potential risks including those associated with human factors aspects of synthetic training devices are identified
  • 1.3 Limitations of synthetic training device are identified
  • 1.4 Delivery plan is developed to plan, manage and sequence synthetic training activities and events to ensure logical progression of learning content, trainee safety and continuity of trainee progress
  • 1.5 Technical and human factors requirements for synthetic environment including safety and emergency procedures, are confirmed
2 Prepare trainee for synthetic training activities
  • 2.1 Availability of suitable resources is confirmed
  • 2.2 Mental and physical preparedness of trainee to undertake training in synthetic environment is confirmed
  • 2.3 Introduction to synthetic environment is provided including training objectives and relevant workplace procedures
  • 2.4 Instructional relationships are established between trainer/facilitator and trainees using appropriate communication tools and skills
  • 2.5 Trainee is briefed on how synthetic training activity will be conducted to meet training objectives
  • 2.6 Risk management issues applicable to synthetic training activity are discussed with trainee and trainee responsibility for managing relevant risks is confirmed
  • 2.7 Trainee ability to comprehend and/or recall training objectives, knowledge, handling techniques and planned synthetic training activity/scenario is confirmed
3 Guide and facilitate learning in a synthetic environment
  • 3.1 Liaison with relevant personnel is conducted to determine simulation activity requirements
  • 3.2 Learning is facilitated in accordance with delivery plan using relevant synthetic devices and facilitation skills
  • 3.3 Good practice in facilitating learning in a synthetic environment is applied to ensure an effective and safe transfer of learning to the real world
  • 3.4 Technical issues are addressed as required using relevant technical support mechanisms and/or personnel
  • 3.5 Opportunities for authentic learning, practice and formative assessment are built into the learning experience
  • 3.6 Pre-loaded automatic demonstrations are employed as required
  • 3.7 Abnormal/unusual conditions are monitored and addressed
  • 3.8 Variations to activity conditions are implemented as required
  • 3.9 Handover/takeover procedures for control of synthetic device are implemented in accordance with workplace procedures
4 Monitor learning in a synthetic environment
  • 4.1 Trainee progress is monitored and documented in accordance with workplace procedures
  • 4.2 Trainee cognitive load is assessed, monitored and managed
  • 4.3 Support and guidance are provided within synthetic environment as appropriate
  • 4.4 Trainee is encouraged to develop self-assessment skills
  • 4.5 Trainee interaction with others and participation in synthetic training activities is continuously monitored, and interventions are made as required
  • 4.6 Opportunities are provided for trainees to reflect on their learning progress
5 Conduct post-training activities
  • 5.1 Significant details of trainee performance are clearly and accurately debriefed
  • 5.2 Playback devices are employed during debriefing to illustrate key learning points as required
  • 5.3 Trainee is briefed on details of next training event as required
  • 5.4 Trainee records are maintained in accordance with workplace procedures
  • 5.5 Relevant stakeholders are kept informed about trainee progress
  • 5.6 Synthetic device faults are recorded and/or rectified in accordance with workplace procedures
  • 5.7 Support and guidance are provided post synthetic environment activities as required
6 Review synthetic environment facilitation processes
  • 6.1 Synthetic training session outcomes are evaluated against desired session outcomes
  • 6.2 Review is undertaken post-completion of learning program, course or qualification
  • 6.3 Time is taken to reflect on own performance as a trainer or facilitator, and ways to improve performance are explored
  • 6.4 Recommendations for improvements in facilitating training and appropriateness of synthetic systems, tools and resources are identified and documented, and discussed with relevant personnel for future action
No information
No information
Replaces
State Code National Code Title Type
WB804 AVIM5004A Facilitate training in a synthetic environment Unit of competency
Replaced By
State Code National Code Title Type
OBC57 AVIM0009 Facilitate training in a synthetic environment Unit of competency