Unit of competency Outline

Date retreived
23/07/2026 6:08 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Remove and replace electrical units and assemblies

Remove and replace electrical units and assemblies

Unit of competency
National Code
AURETR008
State Code
AXD95
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030505 - Automotive Electrics And Electronics
Original Release Date
13/07/2016
Nominal Hours
15
Description
This unit describes the performance outcomes required to remove and replace electrical units and assemblies. Electrical units and assemblies include headlights, tail-lights, and vehicle and machinery control modules that do not require programming procedures on replacement. These electrical units and assemblies are not connected to vehicle controller area network databus (CAN-bus) topography.It applies to those working in the automotive service and repair industry. The electrical units and assemblies include those fitted to agricultural machinery, heavy commercial vehicles, light vehicles, vessels, motorcycles, mobile plant machinery or outdoor power equipment.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to remove and replace electrical unit and assemblies
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Workplace procedures and manufacturer specifications are accessed and interpreted
  • 1.3 Hazards associated with the work are identified and risks are managed
  • 1.4 Tools and equipment are selected and checked for serviceability
2. Remove electrical unit and assembly
  • 2.1 Removal information is accessed and interpreted from manufacturer and component supplier specifications
  • 2.2 Electrical unit and assembly are removed using approved methods, tools and equipment and according to manufacturer specifications, workplace procedures and safety requirements
  • 2.3 Unit and assembly are handled and stored according to manufacturer and component supplier requirements
3. Replace electrical unit and assembly
  • 3.1 Replacement information is accessed and interpreted from manufacturer and component supplier specifications
  • 3.2 Electrical unit and assembly are replaced using approved methods, tools and equipment and according to manufacturer specifications and workplace procedures
4. Test electrical unit and assembly
  • 4.1 Replaced electrical unit and assembly are checked and tested to confirm correct operation and that no other problems are present, according to workplace procedures and without causing damage to components or systems
  • 4.2 Test results are reported according to workplace procedures, including recommendations for repairs or adjustments as required
5. Complete work processes
  • 5.1 Final inspection is made to ensure work is to workplace expectations and vehicle or machinery is presented ready for use
  • 5.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  • 5.3 Tools and equipment are checked and stored and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures
  • 5.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF088 AURETR2008 Remove and replace electrical units and assemblies Unit of competency