Unit of competency Outline

Date retreived
22/07/2026 7:27 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install suspended ceilings

Install suspended ceilings

Unit of competency
National Code
CPCCWC3004
State Code
BBA82
TGA Status
Current
DTWD Status
Approved
Current Release Number
5.00
Current Release Date
24/12/2024
View on TGA
State Implementation and Classification
Approved Date
23/01/2017
Field of Education
040313 - Ceiling, Wall And Floor Fixing
Original Release Date
23/01/2017
Nominal Hours
80
Description
This unit of competency specifies the skills and knowledge required to install exposed and concealed suspended ceilings.It includes setting out and installing ceiling suspension systems and installing lining material.A person working at this level would be expected to take responsibility for organising and completing tasks assigned to them without close supervision.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001Prepare to work safely in the construction industry meets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan and prepare.
  • 1.1 Read and interpret work instructions and plan sequence of work.
  • 1.2 Plan all work to comply with laws and regulations, the National Construction Code (NCC), Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications, and workplace requirements.
  • 1.3 Select and use personal protective equipment (PPE) for each stage of the task.
  • 1.4 Inspect work site, assess hazards and apply risk controls, including required signage and barricades.
  • 1.5 Select tools and equipment, check for serviceability and report any faults that may affect the safe operation of the equipment, tag equipment and set aside.
  • 1.6 Select materials required for task, calculate quantities, handle safely and prepare and position ready for use.
2 Install suspension system.
  • 2.1 Set out ceiling grid and alignment levels for ceiling.
  • 2.2 Fix suspension rods to underside of soffit and structural members with masonry anchors, bolts and screws at prescribed centres.
  • 2.3 Assemble suspended framework and connect to suspension rods.
  • 2.4 Fasten suspension system, check for looseness and rattles, and secure as required.
  • 2.5 Fix bridging framework to both sides of service ducts to support suspension system.
3 Install lining materials.
  • 3.1 Install lining materials according to design pattern set out in job drawings.
  • 3.2 Cut edges of lining materials and conceal to match pre-finished edges.
  • 3.3 Provide openings and penetrations as shown in job drawings.
  • 3.4 Fix trims and beads at junctions with other building elements and surfaces.
4 Clean up.
  • 4.1 Clear work area and dispose of, reuse or recycle materials.
  • 4.2 Clean, check, maintain and store tools and equipment in accordance with manufacturers’ specifications.
No information
No information
Replaces
State Code National Code Title Type
W9607 CPCCWC3004A Install suspended ceilings Unit of competency