Unit of competency Outline

Date retreived
22/07/2026 8:12 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Monitor in-process quality assurance

Monitor in-process quality assurance

Unit of competency
National Code
PPMQAS301
State Code
ODT97
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
10/02/2022
View on TGA
State Implementation and Classification
Approved Date
31/05/2022
Field of Education
080317 - Quality Management
Original Release Date
31/05/2022
Nominal Hours
30
Description
This unit of competency describes the skills and knowledge required to identify and monitor critical control points to maintain the quality for pulp and paper manufacturing product and processes.The unit applies to production operators who work in a pulp and/or paper manufacturing facility and are expected to take responsibility for the quality of product and process.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Identify and monitor critical control points for in-process system
  • 1.1 Identify and determine critical control points and corrective action priorities for in-process system according to production specifications and workplace quality standards
  • 1.2 Monitor performance at each critical control point in the in-process system through inspection and testing
  • 1.3 Identify need for corrective action based on inspection and out-of-specification testing results
2. Monitor and maintain performance for in-process system
  • 2.1 Monitor product and process within the in-process quality assurance system and adjust to achieve performance within quality standards
  • 2.2 Communicate required corrective action to be taken according to performance criteria
  • 2.3 Make adjustments to process, rectify problem within own responsibility or report to relevant personnel
  • 2.4 Manage non-conforming product according to operating procedures
3. Record and report corrective action
  • 3.1 Record outcomes of routine inspections and testing and corrective action according to workplace requirements
  • 3.2 Report and communicate corrective action and improved performance to relevant personnel
No information
No information
Replaces
State Code National Code Title Type
AXG62 PPMQAS420 Co-ordinate in-process quality assurance Unit of competency
State Code National Code Title Type
BHM1 PPM30121 Certificate III in Pulp and Paper Operations Qualification