Unit of competency Outline

Date retreived
23/07/2026 10:07 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Fabricate or machine tooling

Fabricate or machine tooling

Unit of competency
National Code
MSTGN4012
State Code
BAV76
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
04/07/2016
View on TGA
State Implementation and Classification
Approved Date
01/12/2016
Field of Education
030707 - Metal Fitting, Turning And MacHining
Original Release Date
01/12/2016
Nominal Hours
50
Description
This unit of competency covers the skills and knowledge required to fabricate or machine tooling for applications within an enterprise.The unit of competency applies to activities associated with the forming and shaping of tools. Discretion and judgement may be required, for both self and others, in planning and selecting processes, procedures or outcomes.This unit of competency is applicable to all sectors of the textiles, clothing and footwear (TCF) industry.Work may be conducted in small to large scale enterprises and may involve individual and team activities. Work is performed within defined procedures No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications, drawings, job sheets or work instructions
2 Prepare tooling requirements
  • 2.1 Determine tooling requirements, measurements and limitations are according to design specifications provided
  • 2.2 Seek clarification related to tooling application, where required
  • 2.3 Select appropriate machines and equipment for the tasks
  • 2.4 Prepare and adjust machines and equipment, as necessary, for operation according to standard operating procedures
3 Form or shape tool
  • 3.1 Select, mark or otherwise prepare tooling material for fabrication and machining
  • 3.2 Make allowances for shrinkage, thicknesses, templates, gauges and inside or outside measurements
  • 3.3 Perform fabrication or machining procedures in accordance with WHS practices and workplace procedures
  • 3.4 Check completed tooling conforms to design specifications
No information
No information
Replaces
State Code National Code Title Type
W7330 LMTGN4012A Fabricate or machine tooling Unit of competency