Unit of competency Outline

Date retreived
22/07/2026 6:52 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate a robotic sample preparation system

Operate a robotic sample preparation system

Unit of competency
National Code
MSL953004
State Code
OAC23
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
20/07/2018
View on TGA
State Implementation and Classification
Approved Date
29/11/2018
Field of Education
019909 - Laboratory Technology
Original Release Date
29/11/2018
Nominal Hours
50
Description
This unit of competency describes the skills and knowledge to operate a robotic sample preparation system to ensure efficient throughput of samples without sacrificing quality or safety. Personnel are expected to seek advice from their shift supervisor when non-routine problems arise.This unit of competency applies to instrument operators in the mining, construction materials testing and manufacturing industry sectors. Robotic sample preparation systems are used where there are high volumes of material and/or there is a need to minimise the operator's contact with potentially hazardous materials.No licensing or certification requirements exist at the time of publication. However, regulations and/or external accreditation requirements for laboratory operations exist, so local requirements should be checked. Relevant legislation, industry standards and codes of practice within Australia must also be applied.
Notes
Elements and Performance Criteria
1 Prepare robotic system for operation
  • 1.1 Perform routine system checks at start of shift
  • 1.2 Confirm shift priorities with supervisor
  • 1.3 Review job requests to identify the samples, required parameters and special instructions/preparation methods for each
  • 1.4 Identify hazards, safety equipment and safe work procedures associated with samples, preparation methods and robotic system
  • 1.5 Check that samples are dry and free of obvious contamination
  • 1.6 Check that the particle size of any sample does not exceed system input size limits
  • 1.7 Check samples against accompanying documentation and record/report any discrepancies
2 Load samples into system
  • 2.1 Scan sample barcodes into system
  • 2.2 Load samples in the correct sequence when the system is ready
  • 2.3 Use system monitor to ensure that correct worksheet is assigned to each sample
3 Monitor system and report errors
  • 3.1 Monitor screen displays and conduct visual checks, as necessary, to ensure that system operates correctly throughout cycle
  • 3.2 Recognise common error codes and promptly inform supervisor
  • 3.3 Seek advice to deal with any situation beyond scope of responsibility or knowledge
4 Unload samples
  • 4.1 Unload samples sequentially in accordance with workplace procedures
  • 4.2 Obtain analytical portions of each sample using workplace procedures
  • 4.3 Label and store analytical portions and excess sample material in accordance with workplace procedures
  • 4.4 Seek advice when problems are beyond scope of responsibility or knowledge
5 Maintain a safe work environment
  • 5.1 Use safe work practices and personal protective equipment (PPE) to ensure personal safety and that of others
  • 5.2 Minimise the generation of waste and environmental impacts
  • 5.3 Segregate and dispose of wastes in accordance with workplace requirements
  • 5.4 Clean robotic system components, care for and store equipment as required
No information
No information
Replaces
State Code National Code Title Type
AWO33 MSL953002 Operate a robotic sample preparation system Unit of competency