Unit of competency Outline
Date retreived
23/07/2026 8:13 AM AWST
23/07/2026 8:13 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Perform basic marine engineering calculations
Perform basic marine engineering calculations
Unit of competency
National Code
MARL5012A
MARL5012A
State Code
WG470
WG470
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
04/02/2014
Field of Education
031705 - Marine Craft Operation
Original Release Date
04/02/2014
Nominal Hours
20
Description
This unit involves the skills and knowledge required to perform basic marine engineering calculations required for the operation of marine machinery and equipment.
Notes
Elements and Performance Criteria
1 Apply mathematical formulae to solve marine engineering problems
- 1.1 Proportions, variation, percentages and averages are calculated, and method of unity is applied
- 1.2 Problems involving the manipulation of indices are solved
- 1.3 Written descriptions of actual or hypothetical marine engineering problems are expressed in mathematical terms
- 1.4 Algebraic formulae and equations are manipulated to change subjects, as and when required
- 1.5 Index problems are converted to logarithmic problems, and vice versa, according to the Law of Logarithms
- 1.6 Calculator is used to resolve marine engineering problems
2 Calculate areas, volumes and masses of regular and irregular figures
- 2.1 Problems related to areas and volumes of regular geometric figures are solved using standard formulae
- 2.2 Problems relating to surface areas and volumes of circular figures are solved
- 2.3 Centres of gravity and centroids of area are found for both line figures and areas
- 2.4 Concept of density is applied to calculate masses
3 Apply trigonometry to solve problems relating to angular measurement and the resolution of vectors
- 3.1 Basic trigonometric ratios of sine, cosine and tangent, together with their reciprocals are explained with respect to the sides of a right-angled triangle
- 3.2 Pythagoras’ Theorem is proved
- 3.3 Problems associated with single angle trigonometric identities including those derived from the application of Pythagoras’ Theorem to the basic sin, cos and tan identities are solved
- 3.4 Derivation of multiple, double and half angle trigonometric identities are shown and used to simplify complicated trigonometric expressions and identities
- 3.5 Sine Rule and Cosine Rule for solution of triangles are proved and applied
Not applicable.
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, the required skills and knowledge, the range statement and the Assessment Guidelines for the Training Package.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the Elements, Performance Criteria, Required Skills, Required Knowledge and include:
performing accurate and reliable calculations
solving problems using appropriate laws and principles.
Context of and specific resources for assessment
Performance is demonstrated consistently over time and in a suitable range of contexts.
Resources for assessment include access to:
industry-approved marine operations site where performing basic marine engineering calculations may be conducted
technical reference library with current publications on marine engineering calculations
tools, equipment and personal protective equipment currently used in industry
relevant regulatory and equipment documentation that impacts on work activities
range of relevant exercises, case studies and/or other simulated practical and knowledge assessments
appropriate range of relevant operational situations in the workplace.
In both real and simulated environments, access is required to:
relevant and appropriate materials and equipment
applicable documentation including workplace procedures, regulations, codes of practice and operation manuals.
Method of assessment
Practical assessment must occur in an:
appropriately simulated workplace environment and/or
appropriate range of situations in the workplace.
A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate to this unit:
direct observation of the candidate performing basic marine engineering calculations
direct observation of the candidate applying relevant WHS/OHS requirements and work practices.
Guidance information for assessment
Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended.
In all cases where practical assessment is used it should be combined with targeted questioning to assess Required Knowledge.
Assessment processes and techniques must be appropriate to the language and literacy requirements of the work being performed and the capacity of the candidate.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the Elements, Performance Criteria, Required Skills, Required Knowledge and include:
performing accurate and reliable calculations
solving problems using appropriate laws and principles.
Context of and specific resources for assessment
Performance is demonstrated consistently over time and in a suitable range of contexts.
Resources for assessment include access to:
industry-approved marine operations site where performing basic marine engineering calculations may be conducted
technical reference library with current publications on marine engineering calculations
tools, equipment and personal protective equipment currently used in industry
relevant regulatory and equipment documentation that impacts on work activities
range of relevant exercises, case studies and/or other simulated practical and knowledge assessments
appropriate range of relevant operational situations in the workplace.
In both real and simulated environments, access is required to:
relevant and appropriate materials and equipment
applicable documentation including workplace procedures, regulations, codes of practice and operation manuals.
Method of assessment
Practical assessment must occur in an:
appropriately simulated workplace environment and/or
appropriate range of situations in the workplace.
A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate to this unit:
direct observation of the candidate performing basic marine engineering calculations
direct observation of the candidate applying relevant WHS/OHS requirements and work practices.
Guidance information for assessment
Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended.
In all cases where practical assessment is used it should be combined with targeted questioning to assess Required Knowledge.
Assessment processes and techniques must be appropriate to the language and literacy requirements of the work being performed and the capacity of the candidate.
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WH876 | MARL009 | Perform basic marine engineering calculations | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| J563 | MAR50213 | Diploma of Maritime Operations (Engineer Watchkeeper) | Qualification |