Unit of competency Outline

Date retreived
22/07/2026 8:26 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Remove, inspect and fit earthmoving and off-the-road tyres

Remove, inspect and fit earthmoving and off-the-road tyres

Unit of competency
National Code
AURKTJ011
State Code
OAK30
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
07/12/2018
View on TGA
State Implementation and Classification
Approved Date
15/03/2019
Field of Education
030503 - Vehicle Mechanics
Original Release Date
15/03/2019
Nominal Hours
35
Description
This unit describes the performance outcomes required to remove, inspect and fit earthmoving and off-the-road (OTR) tyres to construction and mining vehicles. It involves removing the tyre from the rim, identifying and controlling risks, inspecting the tyre, assembling the wheel and rim, recommending required repair action, inflation, deflation, and preparing the tyre, wheel and rim assembly for use or storage.It applies to those who fit tyres to wheel and rim assemblies of not less than 600 mm (24 inches) nominal diameter.Licensing, legislative, regulatory, Australian standards or certification requirements may apply to this unit in some jurisdictions. Users are advised to check with the relevant regulatory authority.
Notes
Elements and Performance Criteria
1. Assess and control risks
  • 1.1 Identify and control hazardous conditions in the work environment
  • 1.2 Identify and apply safety requirements to control hazardous tyre, wheel and rim assembly conditions, noting points where safety checks are required
  • 1.3 Obtain and interpret emergency procedures and be prepared for fires, accidents and emergencies
  • 1.4 Identify hazards and environmental issues, assess potential risks, and implement control measures in line with workplace policies
2. Prepare to remove tyre from wheel or rim
  • 2.1 Obtain and interpret manufacturer procedures original equipment manufacturer (OEM) specifications, workplace procedures, and applicable standards for earthmoving and off-the-road tyres
  • 2.2 Obtain, interpret, clarify and confirm work requirements
  • 2.3 Plan sequence of work, noting points where safety checks are required
  • 2.4 Select and wear personal protective equipment required for the work activity
  • 2.5 Coordinate and communicate planned activities with others at the site as per work requirements
  • 2.6 Identify tyre, wheel and rim components
  • 2.7 Select and inspect tools and equipment according to manufacturer instructions and workplace procedures
  • 2.8 Prepare, clean and inspect tyre, wheel and rim assembly for damage, wear, corrosion, foreign material, cracks, and compatibility of component
3. Deflate and remove tyre from wheel or rim
  • 3.1 Isolate, jack, raise and support vehicle according to workplace procedures
  • 3.2 Deflate tyre according to manufacturer instructions and workplace procedures
  • 3.3 Verify appropriate deflation of tyre in line with workplace procedures and OEM requirements
  • 3.4 Apply workplace procedures for the safe removal and purging of hazardous fill substances
  • 3.5 Remove tyre according to workplace procedures and without causing component damage or injury
4. Inspect tyre, wheel or rim and recommend repair and replacement actions for unserviceable components
  • 4.1 Clean and visually inspect tyre, wheel or rim for serviceability and compatibility for application according to workplace procedures and OEM specifications
  • 4.2 Record and report inspection findings according to workplace procedures
  • 4.3 Document recommended repair and replacement actions and report to relevant personnel according to workplace procedures
5. Fit tyre to wheel or rim
  • 5.1 Access and interpret workplace procedures and OEM specifications for fitting tyres
  • 5.2 Assess need for tyre additive and nitrogen and add where required
  • 5.3 Fit tyre according to workplace and manufacturer procedures
  • 5.4 Perform post-fit inspections of tyre, wheel and rim assembly according to workplace procedures to confirm correct assembly, component compatibility, serviceability, and correct seating of components prior to inflation
6. Inflate tyre
  • 6.1 Identify and apply tyre inflation safety procedures
  • 6.2 Inflate tyre for transport, storage or use according to workplace procedures and manufacturer specifications
  • 6.3 Monitor tyre, wheel and rim assembly during inflation according to workplace procedures
7. Complete work processes
  • 7.1 Perform final inspection to ensure work meets workplace requirements and OEM requirements
  • 7.2 Prepare tyre, wheel and rim assembly for use or storage according to workplace procedures
  • 7.3 Inspect and store tools and equipment according to workplace procedures, tagging or reporting where necessary
  • 7.4 Complete workplace documentation according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WI783 AURKTJ001 Remove, inspect and fit earthmoving and off-the-road tyres Unit of competency
WH661 RIISAM211D Remove, repair and refit tyres and tubes Unit of competency