Unit of competency Outline

Date retreived
22/07/2026 5:27 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply patterns and designs to security screens and grilles

Apply patterns and designs to security screens and grilles

Unit of competency
National Code
MSFSS3002
State Code
WI658
TGA Status
Deleted
DTWD Status
Transition (Deleted)
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
030199 - Manufacturing Engineering And Technology, N.e.c.
Original Release Date
19/06/2014
Nominal Hours
30
Description
This unit of competency covers producing repeatable designs to security screens and grilles through the use of patterns. It does not involve the formulation of the design but may require design adjustment to fit the particular job task.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Identify work requirements
  • 1.1 Applicable work health and safety (WHS), legislative and organisational requirements relevant to machine material are verified and complied with
  • 1.2 Work order is reviewed, confirmed and clarified with appropriate personnel
  • 1.3 Design is interpreted to determine work specifications
  • 1.4 Instructions for sequencing of work, particular measurements or adjustments are interpreted
  • 1.5 Work sequence is planned, including quality checkpoints
2 Prepare for work
  • 2.1 Suitable work area is selected for the tasks
  • 2.2 Materials are selected to match customer requirements, suitability for purpose and the work instructions
  • 2.3 Potential hazards are identified from observation of the tools, equipment, materials and workplace reference material
  • 2.4 Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition
3 Complete construction
  • 3.1 Patterns (where not already held of the design) are constructed following work instructions
  • 3.2 Patterns are adjusted where specific variation to the work design is required
  • 3.3 Work is checked against patterns and work sheets at the identified checkpoints
  • 3.4 Any non-conformity with the required quality standards is rectified
4 Finalise work
  • 4.1 Completed work is checked against required quality standard
  • 4.2 Documentation or reporting is completed following workplace procedures
  • 4.3 Work area is cleaned, tools and equipment are returned to storage
  • 4.4 Unused materials are returned to storage and waste and scrap is dealt with following workplace procedures
No information
No information
No information
State Code National Code Title Type
J737 MSF30913 Certificate III in Blinds, Awnings, Security Screens and Grilles Qualification