Unit of competency Outline

Information current as of
19/10/2026 9:48 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Produce computer-aided drawings

Produce computer-aided drawings

Unit of competency
National Code
AUMAKM002
State Code
WH890
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
10/01/2014
View on TGA
State Implementation and Classification
Approved Date
11/03/2014
Original Release Date
10/01/2014
Nominal Hours
60
Field of Education
020115 - Computer Graphics
Description
This unit describes the performance outcomes required to produce drawings using computer-aided drafting (CAD) equipment and techniques, required in the design, development and production of vehicles and components.It applies to those in an automotive manufacturing environment.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of endorsement.
General notes
N/A
Elements and Performance Criteria
1. Prepare for the job
  • 1.1 CAD project objectives and job order are identified and confirmed according to workplace procedures
  • 1.2 CAD requirements and processes are determined based on consideration of project and identified parameters
  • 1.3 Required computer software is selected and installed if required according to workplace procedures
  • 1.4 Files of digitised information relevant to the project are retrieved and converted if required
2. Gather measurements
  • 2.1 Measurements of components, sub-assemblies and products are identified and recorded
  • 2.2 Calculations of required dimensions and other drafting details based on measurements are made
  • 2.3Critical information relevant to the CAD project is identified
3. Prepare drawings
  • 3.1 Critical dimensions and data for the required drawings are established
  • 3.2 Preliminary sketches are prepared and reviewed with appropriate personnel
  • 3.3 CAD package is accessed using the necessary commands according to project objectives, operating instructions and workplace procedures
  • 3.4 2D and 3D computer graphics systems are used to meet project objectives and specifications
4. Check and save drawing files
  • 4.1 Drawings are checked against project objectives and specifications
  • 4.2 CAD data files are stored according to workplace procedures and archiving requirements
5. Plot drawings
  • 5.1 Computer hardware is activated to scan, print or plot as required
  • 5.2 Retrieved information is plotted according to software instructions and task requirements
No information
No information
No information
State Code National Code Title Type
J831 AUM40113 Certificate IV in Automotive Manufacturing Qualification