Unit of competency Outline

Date retreived
22/07/2026 3:06 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Repair cooling systems

Repair cooling systems

Unit of competency
National Code
AURT202166B
State Code
D7672
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
21/06/2011
View on TGA
State Implementation and Classification
Approved Date
12/10/2011
Field of Education
030503 - Vehicle Mechanics
Original Release Date
12/10/2011
Nominal Hours
20
Description
This unit of competency describes the skills and knowledge required to carry out fault diagnosis and repair of air and liquid cooling systems.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for work
  • 1.1. Determine job requirements, including method, processes and equipment
  • 1.2. Read and interpret job specifications
  • 1.3. Access and interpret information from manufacturer/component supplier specifications and workshop manuals
  • 1.4. Determine technical and/or calibration requirements for testing and repairing cooling systems
  • 1.5. Identify equipment and tooling and check for safe and effective operation
  • 1.6. Determine procedures to minimise task time
2. Test cooling systems and analyse results
  • 2.1. Observe occupational health and safety (OHS) requirements, including individual state/territory regulatory requirements and personal protection needs, throughout the work
  • 2.2. Observe warnings in relation to working with pressurised cooling systems
  • 2.3. Perform cooling systems tests in accordance with workplace procedures and manufacturer/component supplier specifications
  • 2.4. Compare test results with manufacturer/component supplier specifications to indicate compliance or non-compliance
  • 2.5. Document results with evidence and supporting information and make recommendations
  • 2.6. Process report in accordance with workplace procedures
3. Carry out repair
  • 3.1. Carry out repairs, component replacement and adjustments in accordance with workplace procedures and manufacturer/component supplier specifications
  • 3.2. Select and use appropriate tooling, techniques and materials
  • 3.3. Repair cooling system without causing damage to component or system
  • 3.4. Make final inspection to ensure work is to workplace expectations
  • 3.5. Complete workplace and equipment documents in accordance with site requirements
4. Clean up work area and maintain equipment
  • 4.1. Collect and store material that can be reused
  • 4.2. Remove waste and scrap following workplace procedures
  • 4.3. Clean equipment and work area and inspect for serviceable condition in accordance with workplace procedures
  • 4.4. Tag unserviceable equipment and identify faults in accordance with workplace requirements
  • 4.5. Complete operator maintenance in accordance with manufacturer/component supplier specifications and site procedures
  • 4.6. Maintain and store tooling and equipment in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
W2981 AURT202166A Repair cooling systems Unit of competency
Replaced By
State Code National Code Title Type
WF402 AURTTC3003 Diagnose and repair cooling systems Unit of competency