Unit of competency Outline

Date retreived
24/07/2026 1:45 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Identify client and site requirements for installation of fabricated textile products

Identify client and site requirements for installation of fabricated textile products

Unit of competency
National Code
MSTTF3001
State Code
BAU51
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
04/07/2016
View on TGA
State Implementation and Classification
Approved Date
01/12/2016
Field of Education
040319 - Furnishing Installation
Original Release Date
01/12/2016
Nominal Hours
20
Description
This unit of competency covers the skills and knowledge required to establish and document client and site requirements for the installation of fabricated textile products.The unit includes identifying client requirements and WHS and environmental issues from site inspection, using discretion, initiative and judgement on the job. Work may be conducted in a variety of environments, such as large to small scale enterprises, including indoor or outdoor operations.All elements of this unit of competency are performed under the general guidance and review of a supervisor.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare to identify client’s requirements on site
  • 1.1 Prepare inspection tools and equipment and arrange for visit on site
  • 1.2 Establish contact and apply communication skills to develop rapport with the client
  • 1.3 Provide personal identification and confirm purpose of visit
  • 1.4 Explain process for determining client's needs
  • 1.5 Obtain permission to inspect location, take measurements and gather relevant information
2 Obtain detailed information from client
  • 2.1 Use appropriate questioning techniques to identify client requirements and gather detailed information
  • 2.2 Present preliminary product information and discuss options with client
  • 2.3 Document client requirements
3 Conduct site inspection
  • 3.1 Arrange and adapt to work area, so that inspection can be conducted safely and efficiently
  • 3.2 Select ladders, steps or bosun's chair, as appropriate, to inspect site and take measurements, and use in accordance with work health and safety (WHS) practices
  • 3.3 Secure and adequately support ladder or other device
  • 3.4 Erect appropriate barriers and signs when operator is overhead
  • 3.5 Seek assistance, as necessary, when working above ground or deck
  • 3.6 Identify safe anchor points for products or other relevant architectural or marine structural equipment
  • 3.7 Take measurements and note special features likely to affect installation of products or their performance in service
  • 3.8 Take account of labour rates and costs of materials and equipment to estimate costs, and record results of inspection
4 Conclude inspection on site
  • 4.1 Replace items shifted or removed during the information gathering process
  • 4.2 Return client equipment used in the inspection process
  • 4.3 Notify client when operator is leaving the site
No information
No information
Replaces
State Code National Code Title Type
W7478 LMTTF3001A Identify customer requirements (on site) Unit of competency
Replaced By
State Code National Code Title Type
OEZ32 MSTTF3008 Establish client and site requirements for manufactured textile products Unit of competency