Unit of competency Outline

Date retreived
22/07/2026 1:08 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Control permit to work operations

Control permit to work operations

Unit of competency
National Code
UEPOPS430
State Code
OAG41
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
31/10/2018
View on TGA
State Implementation and Classification
Approved Date
15/05/2019
Field of Education
080399 - Business And Management, N.e.c.
Original Release Date
15/05/2019
Nominal Hours
27
Description
This unit involves the skills and knowledge required to perform work in association with a permit system.Permits to workare a formal system used to control high risk activities in power generation facilities. They specify the control measures to be used. Permits ensure that all hazards and precautions have been considered beforeany hazardous workbegins.Competency in this unit requires the ability to plan and prepare for permit to work procedures,perform permit duties and complete work. Individuals will, in general, work as an operator, in a power generation facility. Power generation plant operators are typically trained and authorised to isolate, prepare plant and issue permits to work.No licensing, legislative or certification requirements apply to this unit at the time of publication.Note: Workplace practiceThe application of the skills and knowledge described in this unit may require a licence or training permit to practice in the workplace where work is carried out on gas and electrical installations. Additional conditions may apply under state and territory legislative and regulatory licensing requirements.
Notes
Elements and Performance Criteria
1 Plan and prepare for permit to work procedures
  • 1.1 Permit to work requirements are identified from work orders, in accordance with workplace procedures and are confirmed
  • 1.2 Information and documentation related to controlling permit to work procedures is obtained, in accordance with workplace policies and procedures
  • 1.3 Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, industry standards and workplace procedures are identified and monitored
  • 1.4 Power generation plant is identified, in accordance with workplace procedures
  • 1.5 Consultation with key stakeholders to identify state of power generation plant, isolations and maintenance timetable is confirmed, in accordance with workplace procedures
2 Perform permit duties
  • 2.1 Permit is obtained and relevance to work is confirmed, in accordance with workplace procedures and job requirements
  • 2.2 Isolations and appropriate barriers or taggings are confirmed, in accordance with workplace procedures and permit requirements
  • 2.3 Permit requirements are clarified to personnel involved in or affected by the work, in accordance with workplace procedures
  • 2.4 Personnel involved in work tasks are signed on to permits prior to commencement of work, in accordance with workplace procedures
  • 2.5 Permit conditions are monitored and controlled throughout work sequence, in accordance with workplace procedures
3 Complete work
  • 3.1 Power generation plant is inspected and returned to normal operation, in accordance with workplace procedures
  • 3.2 Staff signed on to permit are signed off, in accordance with workplace procedures
  • 3.3 Work is completed and appropriate personnel are notified, in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WE411 UEPOPS430B Control permit to work operations Unit of competency
Replaced By
State Code National Code Title Type
ODY99 UEPOPS021 Control permit to work operations Unit of competency