Unit of competency Outline

Date retreived
22/07/2026 4:26 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Set up machine for basic adhesive, mechanical or thermal fastening

Set up machine for basic adhesive, mechanical or thermal fastening

Unit of competency
National Code
ICPCBF2610
State Code
OBP40
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
06/05/2020
View on TGA
State Implementation and Classification
Approved Date
20/08/2020
Field of Education
030103 - Printing
Original Release Date
20/08/2020
Nominal Hours
30
Description
This unit describes the skills and knowledge required to set up a machine for basic adhesive, mechanical or thermal fastening. Some equipment may also involve cutting, trimming, folding and/or gathering (collating) which may be assessed at the same time.It applies to individuals who prepare material, monitor and run equipment and machinery, and apply solutions to a defined range of unpredictable problems. They may also provide some guidance to others with some limited responsibility for the output of others.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for job
  • 1.1 Identify job specifications
  • 1.2 Set up required printing machinery according to manufacturer specifications and work health and safety (WHS) requirements
  • 1.3 Confirm availability of all job components
  • 1.4 Set up and adjust delivery system
  • 1.5 Remove substrate from the process according to job specifications
2. Set up equipment and in-line units
  • 2.1 Set up and adjust fastening system
  • 2.2 Set up and adjust minor in- units are set up for basic processes according to machine requirements
  • 2.3 Provide assistance in set-up of major in-line units
3. Conduct sample run
  • 3.1 Operate machine according to manufacturer specifications and enterprise procedures to produce specified sample
  • 3.2 Inspect and test sample as required according to enterprise procedures
  • 3.3 Interpret results and make adjustments according to product and machine specifications as required
No information
No information
Replaces
State Code National Code Title Type
AUP25 ICPCBF261 Set up machine for basic adhesive, mechanical or thermal fastening Unit of competency