Unit of competency Outline

Date retreived
22/07/2026 2:55 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Identify affects of energy on machinery and materials in an electrotechnology environment

Identify affects of energy on machinery and materials in an electrotechnology environment

Unit of competency
National Code
UEENEEE046B
State Code
W7846
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
29/07/2011
View on TGA
State Implementation and Classification
Approved Date
05/12/2011
Field of Education
080315 - Project Management
Original Release Date
05/12/2011
Nominal Hours
54
Description
1)1.1) DescriptorThis unit covers effects of energy on machinery and/or materials used in an Electrotechnology environment are identified and completed in an agreed time, to a quality standard and using appropriate technology mediums, where required. It encompasses working safely, applying knowledge of identifying the effects of energy on machinery and materials in an electrotechnology environment..
Notes
Elements and Performance Criteria
1 Prepare to identify effects of energy on machinery and materials.
  • 1.1 Instructions for identifying effects of energy on machinery or materials are communicated and confirmed to ensure clear understanding.
  • 1.2 OHS policies and procedures are communicated and confirmed to ensure they are understood as they apply to the carrying out of the work.
  • 1.3 Tools, equipment and personnel protective equipment necessary for the work are identified, scheduled and checked to ensure they work correctly as intended and are safe to use in accordance with established procedures.
  • 1.4 Appropriate personnel are consulted to ensure effects of energy on machinery or materials are identified and coordinated effectively with others involved.
  • 1.5 Resources and materials needed to do the work are confirmed, scheduled and obtained in accordance with established procedures.
  • 1.6 Schedule for identifying effects of energy on machinery or materials including practices for working safely are confirmed in accordance with instructions and requirements.
2 Identify effects of energy on machinery and materials.
  • 2.1 OHS policies and procedures and safe work practices are followed to eliminate or minimise incidents.
  • 2.2 Schedule for identifying effects of energy on machinery or materials work is followed to ensure work is completed in an agreed time, to a quality standard and with a minimum of waste.
  • 2.3 Further instructions are sought from appropriate personnel in the event of unplanned happenings or conditions.
  • 2.4 Ongoing checks of work quality are undertaken in accordance with instructions and requirements.
3 Check results of the effects of energy on machinery and materials.
  • 3.1 Final checks are made to ensure the effects of energy on machinery or materials as identified conforms with instructions and to requirements.
  • 3.2 Appropriate personnel are notified of completion of the computations.
  • 3.3 Tools, equipment and any surplus resources and materials are, where appropriate, cleaned, checked and returned to storage in accordance with established procedures.
  • 3.4 Work area is cleaned up and made safe and sustainable energy practices are followed.
  • 3.5 Appropriate records are updated in accordance with instructions and established procedures.
No information
No information
Replaced By
State Code National Code Title Type
WC440 UEENEEE146A Identify effects of energy on machinery and materials in an energy sector environment Unit of competency